 |
|
|
|
|
|
SP-300 Series Specifications |
| General |
VHF model |
UHF model |
| Frequency Range |
V2: 148-174 MHz |
U2: 440-470 MHz |
| Channels |
4/16 |
|
Channel Spacing |
30 / 25 / 15 / 12.5 kHz |
|
| PLL Step |
5.0 / 6.25 / 7.5 kHz |
|
| Channel Spread | 26 MHz | 30 MHz |
| Antenna Impedance | 50 W | |
| Operating Voltage |
7.5V DC Nominal |
|
|
Battery Life (with 1350 mAh NiMH battery) |
|
|
| Operating Temperature | -22°F to +140°F (-30° C to +60° C) | |
| Frequency Stability (-30° C to +60° C) |
± 2.5 ppm | |
| Dimensions (H x W x
D) with battery |
5-9/16" x 2-1/4" x 1-7/16" (141 x 57 x 37 mm) | |
|
Weight
(with 1350 mAh NiMH battery and Antenna) |
16.4 oz. (465 gm) |
|
| FCC Identifier | F3J130-140V2 | F3J130-140U2 |
FCC Compliance |
Parts 22, 74, 80, 90, 90.210 |
Parts 22, 74, 90, 90.210, 95A |
| Canada Certification Number | 3772195280A | 3772195281A |
|
RECEIVER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
| Sensitivity (12 dB SINAD) | .25 µV |
|
| Selectivity |
>65 dB @12.5 kHz |
>75 dB @25 kHz |
| Intermodulation |
70 dB |
|
| Spurious Response | 75 dB |
|
| Audio output |
400 mW (Int.) @ 2 Ω; 400 mW
(Ext.) @ 8 Ω |
|
|
TRANSMITTER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
| RF Output | 5 Watts or 1 Watt (programmable per channel) | |
| Spurious and Harmonics Emissions | 65 dBc |
|
| Modulation |
16KOF3E, 11KOF3E |
|
| FM Hum and Noise | >40 dB @ 12.5 kHz; |
>42 dB @ 25 kHz |
| Audio distortion |
2% |
|
|
MIL-STD methods / procedures The Maxon SP-300 Series is approved to the following: |
| Standard | 810F Method / Procedure |
| Rain (Watertightness) | 506.4 / Proc. II |
| Humidity | 507.4 / Proc. I |
| Blowing Dust | 510.4 / Proc. I |
| Vibration | 514.5 / Proc. I, IV |
| Shock | 516.5 / Proc. I, IV |
| Specifications are subject to change without notice. |
|
Wisco
International - 690 W 28 St. Hialeah, FL 33010 USA Telf. (305) 888-1676 - Fax (305) 887-1624 - E-mail: wiscointl@wiscointl.com |
