 |
|
|
|
|
|
SP-200 Series Specifications |
| General |
VHF model |
UHF model |
| Frequency Range |
V2: 148-174 MHz |
U2: 440-470 MHz |
| Channels |
Up to 199 |
|
Channel Spacing |
30 / 25 / 15 / 12.5 kHz |
|
| PLL Step |
5.0 / 6.25 / 7.5 kHz |
5.0 / 6.25 kHz |
| Channel Spread | 26 MHz | 30 MHz |
| Antenna Impedance | 50 W | |
| Operating Voltage |
7.5V DC Nominal |
|
|
Battery Life (with 1350 mAh NiMH battery) (with optional 900 mAh Prismatic battery) |
|
|
| Operating Temperature | -22�F to +140�F (-30� C to +60� C) | |
| Frequency Stability (-30� C to +60� C) |
� 5.0 ppm | � 3.0 ppm |
| Dimensions (H x W x
D) with battery |
4-1/4" x 2-5/16" x 1-1/2" (108 x 59 x 38 mm) |
|
|
Weight
(with 1350 mAh NiMH battery and Antenna) |
11.8 oz. (335 gm) |
|
| FCC Identifier | F3JSP200V2 |
F3JSP200U2 |
FCC Compliance |
Parts 22, 74, 80, 90, 90.210 |
Parts 22, 74, 90, 90.210, 95A |
| Canada Certification Number | 3772195571A | 3772195572A |
|
RECEIVER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
| Sensitivity (12 dB SINAD) | .25 �V |
|
| Selectivity |
65 dB @12.5 kHz |
72 dB @25 kHz |
| Intermodulation |
60 dB |
|
| Spurious Response | 70 dB |
|
| Audio output |
1.0 W (Int.) @ 4 W; 550mW (ext.) @ 8 W; |
|
|
TRANSMITTER (Measurements procedures made per ANSI/TIA/EIA-603) |
||
| RF Output | 5 Watts or 1 Watt (programmable per channel) | |
| Spurious and Harmonics Emissions | 60 dB |
|
| Modulation |
16KOF3E, 11KOF3E, 10KOF3E |
|
| FM Hum and Noise | 40 dB @ 12.5 kHz; 42 dB @ 25 kHz |
|
| Audio distortion |
2% |
|
|
MIL-STD methods / procedures The Maxon SP-200 and SP-210 are approved to the following: |
| Standard | 810F Method / Procedure |
| Rain (Watertightness) | 506.4 / Proc. II |
| Humidity | 507.4 / Proc. I |
| Blowing Dust | 510.4 / Proc. I |
| Vibration | 514.5 / Proc. I |
| Shock | 516.5 / Proc. I, IV |
| Specifications are subject to change without notice. |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
