 |
|
|
|
|
|
Specifications |
| General | VHF
Band SM-6150 |
UHF
Band SM-6450 |
| Frequency Range | 148-174 MHz | 450-480 MHz |
| Channels | 6 | 16 |
| Channel Spacing | 30 / 25 / 15 / 12.5 KHz | |
| PLL Step |
5.0 / 6.25 / 7.5 KHz |
5.0 / 6.25 KHz |
| Channel Spread | 26 MHz | 30 MHz |
| Antenna Impedance |
50 Ω |
|
| Input Voltage (removal) | 110V / 220 Vac (220Vac Requires jumpers) | |
| Current Drain Standby Receive Transmit |
|
|
| Operating Temperature | -22° F to 140°F / -30° to +60° C | |
| Frequency Stability |
± 2.5 ppm |
|
| FCC Identifier |
F3JSM6150V2 |
F3JSM6450U6 |
| FCC Compliance |
Parts 22, 74, 90 |
Parts 22, 74, 80, 90, 95 |
| Canadian Certification No. |
3772195714A |
3772195653A |
| Receiver (measurement procedures made per ANSI/EIA/TIA-603) | ||
| Sensitivity (12dB SINAD) |
0.25 µV @ 12.5 KHz | 0.25 µV @ 25 KHz |
| Selectivity | 62 dB @ 12.5 KHz | 72 dB @ 25 KHz |
| Intermodulation | 72 dB @ 12.5 KHz | 72 dB @ 25 KHz |
| Spurious Response |
75 dB |
|
| Audio Output | (4W (int.) 16 Ω ; Method @ 5% THD level) | |
| Transmitter (measurement procedures made per ANSI/EIA/TIA-603) | ||
| Spurious & Harmonics | 75 dB | |
| Modulation | 16K0F3E, 11K0F3E | |
| FM Hum & Noise | 36 dB @ 12.5 KHz | 42 dB @ 25 KHz |
| Audio Distortion | 2% (int.); <10% (Ext.) | |
|
MIL-STD methods / procedures The Maxon SM-6150 and SM-6450 are approved to the following: |
| Standard | 810F Method / Procedure |
| Blowing Dust | 510.4 / Proc. I |
| Vibration | 514.5 / Proc. I |
| Shock | 516.5 / Proc. I |
| Specifications are subject to change without notice. |
|
WISCO International, Inc. -
10388 W. STATE RD. 84 #
109 MIAMI, FL 33324-4252. USA Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
