WISCO International

Kenwood

Home Page | Manufacturers | Kenwood | TK-7160H/8160H | Quotation | Search | E-mail

Specifications
General

TK-7160

TK-7160H

TK-8160

TK-8160H
Frequency Range

136 ~ 174 MHz

450 ~ 490 MHz
Number of channels
   Zone
   Channel


Max. 128 per Radio
Max 128 per Zone

Channel Spacing
   Wide
   Narrow


25 kHz, 30 kHz
12.5 kHz, 15 kHz
25 kHz,
12.5 kHz
Operating Voltage

13.6 V DC �15%
Current Drain
Standby
Receive
Transmit


0.4 A
1.0 A
8.0 A


0.4 A
1.0 A
14.0 A


0.4 A
1.0 A
8.0 A


0.4 A
1.0 A
14.0 A
Duty cycle Transmit: 20%
Operating temperature range

-22�F ~+140�F (-30�C ~ +60� C)
Frequency stability

�0.00025% (-22�F ~+140�F)
Antenna Impedance

50 Ω
Channel Frequency Spread 38 MHz 40 MHz
Dimensions (W x H x D),
Projections not included

6-5/16� x 1-11/16� x 5-3/8�
(160 mm x 43 mm x 137 mm)
Weight (net)

2.6 lbs. (1.18 kg)
FCC ID K4437663110 K4437663210 K4437673110 K4437673210
IC Certification � 282F-37663210 � 282F-37673210
RECEIVER (EIA/TIA-204D)

TK-7160

TK-7160H

TK-8160

TK-8160H
Sensitivity (12dB SINAD)
   Wide
   Narrow

0.28 �V
0.35 �V
Selectivity
   Wide
   Narrow		 75 dB
65 dB
Intermodulation
   Wide
   Narrow		 70 dB
60 dB
Spurious response

75 dB
Audio output
(4 Ω impedance)


4 W with less than 5% distortion
TRANSMITTER (Measurements made per EIA/TIA-603)
RF output power 5 W / 25 W 25 W / 50 W 5 W / 25 W 25 W / 45 W
Spurious response

70 dB
Type of emission
   Wide:
   Narrow:


16K0F3E
11K0F3E
FM hum & noise
   Wide
   Narrow

45 dB
40 dB
Microphone impedance

600 W
Audio distortion
    Wide
    Narrow


3 %
5 %

Standard MIL 810C
Methods/Procedures		 MIL 810D
Methods/Procedures		 MIL 810E
Methods/Procedures		 MIL 810F
Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I 500.3/Procedure I, II 500.4/Procedure I,II
High Temperature 501 .I/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.I/Procedure I 502.2/Procedure I 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I ,II
Solar Radiation 505. I/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure II 506.2/Procedure II 506.3/Procedure II 506.4/Procedure III
Humidity 507.I/Procedure I, II 507.2/Procedure I, II 507.3/Procedure II, III 507.4
Salt Fog 509.I/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.I/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure VIII,X 514.4/Procedure I 514.4/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, II, III, V 516.4/Procedure I, IV, V 516.4/Procedure I, IV,V
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | Kenwood | TK-7160H/8160H | Quotation | Search | E-mail