WISCO International (Kenwood- TK-7160H / TK-8160H)

GENERAL FEATURES

25 / 50 W (136-174 MHz) Models

25 / 45 W (450-490 MHz) Models

Conventional Zones

128 Channels / 128 Zones

Single Priority Scan

Single/Multi-Zone Scan

8-Character Alphanumeric Aliases

Backlit LCD & Keys

Function/Status LCD Icons

9 Programmable Function Keys

Emergency / AUX Key

Enhanced Kenwood Audio

4 Watt Front Panel Speaker

Companded Audio

Voice Inversion Scrambler Built-in

Encryption / ANI Board Control

Emergency Call Features

QT / DQT

Operator Selectable Tone

Two-Tone Decode
Single & Two-Tone Encode
DTMF Encode / Decode (1)
Special Alert Tone Patterns (2)
Call Key (2)
Busy Channel Lockout
Time Out Timer
Timed Power Off
Accessory Interface Cable Option (4)
8 Programmable I/O Ports (4)
Ignition Sense (5)
Public Address/Horn Alert Option (6)
MIL-Spec Standard Mic
MIL-Spec 12-Key DTMF Mic Option
Windows® Programming & Tuning (7)
Windows® Firmware Uploading (7)
Front Panel Self-Program Mode
Cloning
MIL-STD-810 C/D/E/F

FleetSync® (8)

PTT ID Digital ANI
Selective Call & Group Call
Status Messaging
Caller ID Display
Input / Output Status Messages
FleetSync GPS Ready (9)
Send GPS PF Key
PTT ID & Emergency GPS Reporting (9)
Ignition On/Off GPS Reporting (5, 9)

Footnotes

1) DTMF includes PTT ID, Emergency ANI, Manual Encode (KMC-36), Auto-Dial (9 numbers) & Stun

2) Special Alert Tone Patterns operate for 2-Tone, DTMF, FleetSync® selective call decode

3) Call Key 1 & 2: operates for 2-Tone, DTMF and FleetSync® status encode

4) KCT-39 required for 4 CH remote control, ignition sense (KCT-18), KGP-2A/B, KDS-100, data modems, external GPS interface

5) KCT-39 & KCT-18 ignition sense cable options required

6) KAP-2 required: Horn Alert operates for FleetSync®, 2-Tone or DTMF selective call decode

7) KPG-99D program software required: Windows®98/ NT/2000/ Me/XP compatible; English/Spanish program screen languages

8) Radio does not support FleetSync® Short & Long Text Messages, PC Serial Protocol or FleetSync® II protocol

9) FleetSync® GPS features require a KCT-39 and an external GPS receiver with NMEA TTL level serial data output; set Port 1 & 2 (Inputs) to “GPS NMEA”