|
|
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
|
|
|
Foam Dielectric Cables Their lower density foam allows higher velocities and provides lower attenuation than FSJ cables. Attenuation characteristics approach those of air dielectric cables.
|
|
1/4" Foam Dielectric LDF Series - 50 Ohm LDF1-50
|
|
Characteristics |
|
Electrical |
Mechanical |
||
|
Impedance, ohms |
50 ± 1 |
Outer Conductor |
Copper. |
|
Maximum Frequency, GHz |
15.8 |
Inner Conductor |
Copper-Clad Aluminum |
|
Velocity, percent |
86 |
Diameter over Jacket, in (mm) |
0.345 (8.8) |
|
Peak Power Rating, kW |
12.1 |
Diameter Copper Outer Conductor, in (mm) |
0.31 (7.7) |
|
dc Resistance, ohms/1000 ft (1000 m) |
1.57 (5.15) 1.02 (3.33) |
Diameter Inner Conductor, in (mm) |
0.102 (2.6) |
|
dc Breakdown, volts |
2200 |
Minimum Bending Radius, in (mm) |
3.0 (76) |
|
Jacket Spark, volts RMS |
5000 |
Number of Bends, minimum (typical) |
15 (30) |
|
Capacitance, pF/ft (m) |
23.4 (76.8) |
Bending Moment, lb-ft (N•m) |
0.98 (1.33) |
|
Inductance, µH/ft (m) |
0.059 (0.19) |
Cable Weight, lb/ft (kg/m) |
0.06 (0.09) |
|
Tensile Strength, lb (kg) |
200 (91) | ||
|
Flat Plate Crush Strength, lb/in (kg/mm) |
80 (1.4) |
| Connectors | ||
 |
 |
 |
| Interface | Description | Type Number |
Inner
Contact Attachment |
Outer
Contact Attachment |
Plating Code |
Max.
Length in (mm) |
Max. Dia. in (mm) |
|
N Male |
Hex Head |
L1PNM-H |
Solder |
Self-Flare |
SG | 1.9 (49) | 0.94 (23.9) |
|
N Male |
Hex Head |
L1PNM-HC |
Captivated |
Self-Flare |
SS | 2 (52) | 0.89 (17.6) |
|
N Male |
Right Angle |
L1PNR-HC |
Captivated |
Self-Flare |
SG | 2.3/1.3 (58.3/32.7) | 0.91 (23.1) |
|
N Female |
|
L1PNF |
Solder |
Self-Flare |
SG | 2.1 (52) | 0.62 (15.7) |
|
N Female |
|
L1PNF-C |
Captivated |
Self-Flare |
SG | - | - |
|
N Female |
Bulkhead |
L1PNF-BH |
Solder |
Self-Flare |
SG | 2.1 (52) | 0.88 (22.4) |
|
Accessories |
| Description | Type No. |
|
Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). |
|
|
Angle Adapter , for insulated hanger |
40430-1 |
|
Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) |
40417 |
|
Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) |
CT-K350 |
|
Velcro Cable Ties , Black, 8 inch. Indoor UseKit of 10 Kit of 50 Kit of 100 |
VCT8-10 VCT8-50 VCT8-100 |
|
Support/Hoisting Grip . Use at 200-ft (60m) intervals.Grip with one clamp Support clamp kit of 10 |
L1SGRIP L1SGRIP-1IK |
|
Grounding and Surge Protection |
| Description | Type No. |
| Standard Grounding Kit Factory attached one-hole lug, 24" lead Factory attached two-hole lug, 24" lead Field attached one-hole lug, 36" lead |
223158 223158-2 223158-3 |
| Weatherproofing | |
|
Cold Shrink Weatherproofing Kit |
241475-12 241475-11 241548-10 241548-11 |
| Connector/Splice Weatherproofing Kit | 221213 |
|
Entry Systems |
|
|
Standard Cable Entry Boots |
204679A-17 |
|
Tools EASIAX® Plus Automated Cable Prep Tool DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench |
CPT-L1 244377 244379 |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
Home Page | Products | Manufacturers | Andrew | Cables Type | Quotation | Search | E-mail |
