WISCO international (Telewave- Antennas/220F2 )

DESCRIPTION AND FEATURES:

The Telewave ANT220F2 collinear antenna is an extremely rugged, moderate gain version of the industry-standard ANT150F6 antenna. This compact antenna produces 2.5 dBd gain, and is designed for operation in all environmental conditions. The antenna is constructed with brass and copper elements, with a path to ground potential for lightning impulse protection.

All junctions are fully soldered to prevent RF intermodulation, and each antenna is completely
protected within a high-tech ruggedized radome to ensure survivability in the worst environments. The �Cool Blue� radome provides maximum protection from corrosive gases, ultraviolet radiation, icing, salt spray, acid rain, and wind blown abrasives.

MOUNTING:

The ANT220F2 includes a dual clamp set for mounting to a 1.5� to 3� diameter support pipe.
Stand off and top mounts are also available.

ELECTRICAL SPECIFICATIONS
Power Rating (typical)	500 Watts
Gain	2.5 dBd
Frequency Range	195-260 MHz
VSWR	1.5:1 or less
Impedance	50 Ohms
Vertical Beamwidth	38 Degrees
Pattern	Omnidirectional
Lightning Protection	DC Ground
Termination	Recessed Type N or 7-16 DIN Female at base 24� RG-213 jumper supplied with Type N model
MECHANICAL SPECIFICATIONS
Dimensions	46" L x 2.75" diam.
Tower weight (Antenna + clamps)	15 lb
Shipping weight	17 lb.
Max. Rated Wind Velocity	200 MPH
Max. Rated Wind Velocity with 0.5" radial ice	150 MPH
Max. Exposed Area	1.01 Sq. ft.
Lateral Thrust at 100 MPH (40 PSF Flat Plate Equivalent )	40 lb.
Bending Moment at top clamp at 100 MPH (40 PSF Flat Plate Equivalent	36 Ft. lb.