|
|
ANT150D-D3 D-69
138-174
MHz |
DESCRIPTION
AND FEATURES:
Desired tilt angle must be included on the order, and consultation with our engineering staff is recommended. Each antenna is constructed with 6061-T6 aluminum, welded at the base connection to prevent intermodulation, and all elements are at DC ground potential for lightning protection. Each element is completely protected with our proprietary TxylanTM coating. The black TxylanTM coating is highly resistant to the accumulation of water and ice, and provides exceptional protection from corrosive gases, ultraviolet radiation, salt spray, acid rain and abrasives such as windblown sand. MOUNTING: |
SPECIFICATIONS |
COMMON SPECIFICATIONS | |
Power | 500 Watts |
Frequency Range | 138-174 MHz |
VSWR | 1.5:1 or less |
Impedance | 50 Ohms |
Pattern | Adjustable - Offset circular, cardioid, or bidirectional |
Lightning Protection | DC Ground |
Termination | Type N Male on harness feed cable 7-16 DIN-F Optional |
Max. Wind Velocity | 175 MPH 150 MPH |
MODEL SPECIFICATIONS: | ANT150D | ANT150D3 | ANT150D6-9 |
Gain (depent on pattern) | 1-2.5 dBd | 3-6 dBd | 6-9 dBd |
Vertical Beamwidth (3/8λ spacing) | 78� | 37� | 18� |
Dimensions | 35" H x 41" D | 120" H x 41" D | 240" H x 17"D |
Weight | 6 lb | 18 lb. | 26 lb. |
Max. Exposed Area | 0.8 Sq. ft. | 1.6 Sq. ft. | 3.2 Sq. ft. |
Lateral Thrust at 100 MPH | 32 lb. | 64 lb. | 128 lb. |
Torque load at clamp at 100 MPH | N/A | 1-15 deg. | 1-15 deg. |
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |