 |
|
|
|
|
KGP-2A / KGP-2B Specifications |
| General Specifications | |
| Dimensions (W x H x D) without projections |
2-5/16 x 6 1/8 x 1-1/2
in.(58 x 155 x 38 mm) |
| Weight KGP-2A KGP-2B |
21.2 oz (600 g) with
KNB-17A battery, |
| Standard Input Voltage (Input Voltage Range) |
|
| Temperature Range | 29.7 ~ 37.0 MHz |
| Current Range | � 5 ppm (-22�F ~ +140�F) |
| GPS RECEIVER Unit (applies to KGP-2A only) | |
| Receiver Type | 0.25�V |
| Receiver Frequency | 70 dB |
| Supply Voltage to Antenna | 65 dB |
| GPS Backup Term | 70 dB |
| Modem | |
| Modulation | 16K�F3E |
| Modulation Rate | Less than 3% |
| Modem Encode Level Range | 6W / 1W |
|
Modem Decode Level Range |
55 dB / 60 dB |
| Input Impedance |
600 W |
| Output Impedance | 600 W |
Applicable MIL-STD |
| Standard | MIL
810C Methods/Procedures |
MIL
810D Methods/Procedures |
MIL
810E Methods/Procedures |
| Dust | 510.I/Procedure 1 | 510.2/Procedure 1 | 510.3/Procedure 1 |
| Vibration | 514.2/Procedure 8, 10 | 514.3/Procedure 1 CAT.8 | 514.4/Procedure 1 Cat 8 |
| Shock | 516.2/Procedure 1, 2, 5 | 516.3/Procedure 1, 4 | 516.4/Procedure 1, 4 |
|
WISCO International, Inc. -
MIAMI, FL U.S.A. Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com |
