WISCO International

Sinclair Technologies

Home Page | Manufacturers | Sinclair | Antennas | Quotation | Search | E-mail

Yagi Antennas

SY206/EBSY206/EB
The SY206/EB antenna consists of a six-element yagi of outstanding durability and performance. All elements including the folded dipole are maintained at DC Ground potential for lightning protection.
All elements on this antenna are attached to the boom with solid cast aluminum clamps. This highly versatile antenna is supplied as a standard mount yagi, or, as an end-boom mounted unit.
As with other yagis, this VHF antenna is available in multiple-unit arrays for added gain. Horizontally or vertically parallel kits of 'H' frames can readily be supplied to mount two or four yagis with a common feed.

SY212/EB

The SY212/EB is specifically designed to meet medium gain requirements. This rugged three-element antenna can be provided for conventional or end-boom mounting and may be stacked for added gain. All elements are at ground potential for lightning protection.
Note: These series antennas are supplied as universal models with longer booms for end-boom mounting. They can be centre boom mounted by cutting the boom length as per instructions at the time of installation.

SPECIFICATIONS

Electrical

SY206/EB

SY212/EB

Frequency Range

MHz

138-174
Bandwidth
1.5:1 VSWR
2.0:1 VSWR
MHz 4%
8%
4%
6%
Polarization   Vertical or Horizontal
Pattern   Directional
Nominal Gain dBd 9.5 6.5
Horizontal Beamwidth (nom.)
  (half power points)
Deg 60 81
Vertical Beamwidth (nom.)
  (half power points)
Deg 47 55
Front to Back Ratio (typ.) dB 17 12
Power Rating Watts 250
Lightning Protection   DC Ground
Termination   'N' Male

Note:1- VSWR is referenced to 50 Ohms

Mechanical

SY206/EB

SY212/EB

Height in (mm)

108 (2,743)

40 (1,016)

Width   42 (1,067) 38 (965)
Weight lb (kg) 12 (5.45) 5 (2.7)
Rated Wind Velocity mph (km/h) 100 (161) 150 (241)
Rated Wind Velocity with 0.5 in (12.7mm) radial ice mph (km/h) 85 (137)

 

Horizontal Thrust at rated wind velocity and ice load lb (kg) 100 (45.3) 50 (22.7)
Projected Area
  (flat plate equivalent)
f� lb
(m�)
1.7 (0.16) 0.82 (0.075)
Torsional Moment ft lb
(N.m)
346 (469) 130 (176)
Mounting Information A clamps is provided to mount antenna on a 1.9 in (48.3 mm) O.D support pipe
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | Sinclair | Antennas | Quotation | Search | E-mail