|
Full Duplex,
Loaded With Features
 In
1986 we introduced the COM3 Communications Service Monitor. Rivaling
the performance and features of communications service monitors
selling for $10K and more, the COM3 broke the $2,000 price barrier!
For the very first time Ramsey Electronics made it economically
possible for every service vehicle to have their own service
monitor! From 1986 until 2003 the Ramsey COM3 became
THE STANDARD for low cost, performance packed service monitors with
over 5,000 of them put into operation throughout the 2-way radio,
pager, and other communications industries.
That legacy continues today with the Ramsey COM3010. The COM3010 is
our brand new, full duplex service monitor designed from the ground
up to give you the best features available at a price that can’t be
beat! We asked the owners of those 5,000 COM3’s what they would like
to see in a brand new Service Monitor. We took a long hard look at
the competitive units available and came up with the best of both
worlds! The COM3010 provides some of the greatest features available
in a service monitor today, at a fraction of the cost of the
competition.
THE RIGHT CHOICE!
The COM3010 is a full featured communications service monitor
engineered and designed to provide highly accurate measurement and
monitoring of communications equipment from 100kHz to 1.0GHz with
0.1ppm accuracy. Full duplex design enables independent and separate
measurement and testing of transmitter and receiver circuits
simultaneously making it the ideal service monitor for the radio
technology of today...and tomorrow!
All functions are selected with
simple commands and selections on the Elastomeric touch keypad and
are displayed on high contrast dual vacuum fluorescent graphical
displays. For those on-site measurements, all graphical displays can
be “zoomed” to full size to see them across the room! And of course,
battery operation is standard to make field use a breeze!
BUILT-IN POWER METER
Perfect for the two way radio user. Simply key the transmitter while
the radio is connected to the generator output for an instantaneous
reading of RF output power in either watts or dBm. Yes, we said key
the radio into the generator output! The COM3010 incorporates
automatic reverse power protection rated at 100 watts with a
built-in dummy load. No more burned up pads, no separate wattmeter,
and no more worries.
BUILT-IN FREQUENCY
COUNTER
Not sure of the radio frequency? Don’t want to plug it into a
programmer to interrogate the memory? Even worse, don’t want to take
it apart to look at the channel elements or crystals? No problem,
just key the transmitter. The built-in frequency counter will
display the frequency! Counter range is 100kHz to 1.0GHz!
SELF CALIBRATING
RSSI METER
A calibrated Receive Signal Strength Indicator meter makes the
COM3010 perfect for testing filter designs and performance as well
as cable characteristics. Such tests are made simple with the
availability of user memories. 100 groups of 100 memories allow the
storage of a large number of test setups for quick and easy
retrieval.
RECEIVER SINAD METER
Working on a receiver? Check the true SINAD sensitivity of the
receiver with the built-in SINAD meter. Also provides audio
loop-back for the equipment being tested. A separate SINAD meter is
no longer required.
HAND HELD SCOPE OPTION
Sure you can see the zoomed mode displays across the room, but some
people just want a scope display. We took the novel approach that
simply made sense...do you want to spend a lot for a service monitor
with a scope or do you want to spend a little for a service monitor
with a scope? Plug in the optional 10MHz hand held scope directly to
the monitor port on the COM3010 and there’s your scope! Perfect to
check for distortion, noise and audio quality. Oh, by the way, it’s
portable, can be used as a stand-alone scope with direct DVM
readouts for dBm, dBV, DC, and True RMS! Sounds pretty logical
doesn’t it! Especially at a transmitter site where you may need a
separate scope!
THE VALUE PACKED SERVICE MONITOR
WITH BUILT-IN PERFORMANCE!
- 100kHz to 1.0GHz, Full Duplex!
- Built-in Power Meter & Dummy
Load!
- Built-In Frequency Counter!
- Built-In Sweep Generator!
- Built-In SINAD Meter!
- Built-In Calibrated RSSI Meter!
- Built-In RS232 Control
- Built-In Lithium Ion Battery
Packs
|
