WISCO International

Midian Logo

Home Page | ManufacturersMidian | Quotation Request | Search | E-mail

Tone Remote Products

TRATRA
Local Remote Control

Control a base station or Tone/DC remote from an office KTU phone system.

DESCRIPTION

Midian's TRA provides telephone voltages and ring voltages to simulate a telephone line. The TRA uses VOX operation for asserting the PTT of simplex two-way radios or remote controllers. Other features include connect/disconnect ANI's, channel scanning, and multiple decode numbers for individual or group call. Duplex operation is possible when using a duplex mobile radio.

APPLICATIONS

The TRA can be used as a phone line extender for areas without phone line access. It can also be used with a KSU phone system to control a base station or a tone/DC remote or to provide in-plant paging of two-tone, five-tone, or DTMF.

INSTALLATION

Midian's TRA is easily interfaced to many full-duplex or simplex mobile radios and KSU phone systems. The TRA works with most DTMF interconnects including Midian's DTI & STI series interconnects.

ADVANTAGES

  • Works with most DTMF interconnects

  • 5 year warranty

  • Simplex or duplex operation

  • Extends your telephone line to remote locations using 2 duplex radios

  • Makes rural telephone applications simple & inexpensive

  • VOX operation

FEATURES

  • Connect & disconnect ANI's

  • 10 number memory dialer

  • Busy channel lockout

  • Programmable time-out timer

TRA

General Specifications

Operating Temperature

-30 to +60 degrees Celsius

Operating Voltage

11 - 16 VDC

Standby Current

22 mA

Off-hook Current

50 mA

Ringing Current

400 mA

Receive Input Level

50 mV rms min.

Frequency Range

280 - 2800 Hz

Audio Output Level

1 V p.p.

Dimensions (inches)

4.25 L x 3.25 W x 2.0 H


TRC-1
Tone Remote Control
TRC-1

The TRC-1 is a tone remote control that offers up to 14 programmable function tones based on EIA standards. A standard feature includes DTMF encoding. Several options to choose from.

DESCRIPTION

Midian's TRC-1 allows a dispatcher or operator to control a remote base station or repeater using the standard EIA tone format over a dedicated phone line, microwave path or telemetry link. It also employs an intercom feature to allow the dispatcher to talk to other parallel tone remotes on the same system. With the built-in keypad the operator can select up to 15 functions/frequencies and perform DTMF dialing and optionally perform paging and pulse dialing.

Optional features include:
Gooseneck mic, handset or desktop mic
Optional Line 2/Supervisor capability
Optional four wire duplex capability
Optional additional guard/hold tone frequencies available
Optional two-tone, five-tone, & pulse tone encoding

APPLICATIONS

The TRC-1 is an ideal solution for new or existing tone remote control desktop units. Applications include public safety, fleet management, industrial and commercial users.

INSTALLATION

The TRC-1 offers quick installation and level setting via built-in test tones, and a simple interface through an RJ-11 connector.

 ADVANTAGES

  • Cost-effective

  • 2175 Hz notch filters

  • DTMF dialing

FEATURES

  • Uses standard EIA sequential tone format

  • 40 msec monitor function tone (2050 Hz)

  • Various programmable options available

TRC-1

General Specifications

Operating Temperature

-30 to +60 degrees Celsius

Operating Voltage (wall charger)

13 - 18 VDC

Operating Current (standby)

70 mA

Operating Current (peak)

170 mA

Compression Circuitry

Selectable (both TX & RX)

Notch Filters

Normally 2175 Hz (TX & RX)

Control Tones

Up to 14

Hum & Noise

50 db below normal operating level

Dimensions (inches)

8.75 L x 6.5 W x 2.875 H


TRE-2
Tone Remote Encoder
TRE-2

The TRE-2 upgrades your existing tone remote to offer up to 10 function tones or convert a DC remote into a tone remote. The TRE-2 is available as a module, vertical dash mount box, or a keypad bezel.

The TRE-2 is a tone remote encoder available as a module, vertical dash mount box, or a keypad bezel. It offers the 40 msec F1, F2, and monitor function tones. The function tones are preceded by a 120 msec high-level guard tone at 2175 Hz and followed by a 2175 Hz low-level continuous guard tone. It also offers F3-F10 when a keypad is adapted to the TRE-2.

The TRE-2 upgrades your existing tone remote to offer up to 10 function tones or convert a DC remote into a tone remote. It may also be used to key-up base stations of a microwave, continuous carrier radio link paths, or to modify Telco Butt/In test sets for tone remote.

The TRE-2 can be adapted to most base stations, tone remotes, DC remotes, and repeaters.

ADVANTAGES

  • Upgrades existing tone remotes

  • Converts DC remotes into Tone remotes

  • Modify Telco Butt/In test sets for tone remote

  • Can be used for continuous carrier RF links in place of land lines

  • Cost-effective solution

  • 5 year warranty

FEATURES

  • Encodes 2175 Hz high-level guard tone for 120 msec

  • 2175 Hz low-level continuous guard tone

  • 40 msec F1-F10 function tones

  • 40 msec monitor function tone

TRE-2

General Specifications

Operating Temperature

-30 to +60 degrees Celsius

Operating Voltage

5.5-15 VDC (module) or 10-16 VDC (DMV & BEZEL)

Operating Current

2.6 mA (module)
For DMV or BZL see manual or call

Audio Output Level

1 V rms

Dimensions (inches)

Module 1.27 x .83 x .17
For DMV or BZL

WISCO International, Inc. - 10388 W. STATE RD. 84  # 109 MIAMI, FL 33324-4252.  USA
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | ManufacturersMidian | Quotation Request | Search | E-mail