WISCO International (Larsen / Portables

SPOTS! High Performance Molded Portable Antennas

Larsen SPOTS! represent the leading edge in modern antenna technology. SPOTS! are built to the same high standards used in OEM antenna production. These antennas are the same design and construction as supplied to many of the top radio producers.

Fully molded design produces an ultra tough antenna ready for severe handling and weather conditions.
Tough OEM formula polyurethane (PU) - fully molded antenna covering - withstands extremes in temperature, shock and humidity
Hard drawn steel and three mil copper clad helical radiators for high performance
Bronze coated whips for high conductivity
Mechanically connected and soldered construction
Attractive OEM style antenna appearance


WB - WIDEBAND	WH - Whip Antenna	EN - Half Wave End Fed
Exclusive SPOTS! design offers true wideband performance for modern wideband radios. Allows for effective antenna performance across the full band of radio Transformer network in base creates wide band performance. Whip type antenna is durable design made from bronze coated steel braid VHF coverage 136 - 174 UHF coverage 380 - 470 Typical Length: 9"	1/4-Wave Whip Type Antenna Molded from tough, OEM specified Polyurethane Blend for resistance to water, cracking or permanent bending. Special whip material is OEM specification steel braid with bronze coat for improved electrical performance. For UHF, SMR and data applications Typical Length: 6" UHF 3" 800/900	1/2-wave End Fed Whip type antenna Improved performance over 1/4-wave whip due to longer radiator. Molded from tough, OEM specified polyurethane blend for resistance to water, cracking or permanent bending Special whip material is OEM specification steel braid with bronze coat for improved electrical performance For SMR and data applications Typical Length: 7" 800/900

DP - Dipole

Full 1/2-wave Dipole Antenna
Highest performance antenna for 800/900 applications
Center fed design allows true dipole performance with noticeable improvement in range and quality over standard whip antennas
Molded from tough, OEM specified polyurethane blend for resistance to water, cracking or permanent bending.
For SMR and data applications
Typical Length: 9" 800/900

Decoding SPOTS! Part Numbers

Typical part number: SPHL10144

Helical Antenna Type

CODE	ANTENNA TYPE
HL	Helical Type - Standard
HS	Helical Type - Short
WH	Whip
EN	End Fed 1/2-Wave Antenna
DA	1/2 wave dipole with articulated right connector
DP	1/2-Wave Dipole
WB	Wide Band Antenna

Connector Number

CODE	CONNECTOR	CONNECTOR DESCRIPTIONS
10	1/4-32x3/16	Threaded Male Stud Connector	(MX Type)
14	M7x1.0	Threaded Male Stud Connector	(MD Type)
15	BNC	BNC Exposed-Chrome	(BN Type)
16	BNC Covered	BNC Covered	(BNX Type)
17	TNC	TNC Exposed - Chrome	(TN Type)
18	TNC Covered	TNC Covered	(TNX Type)
20	SMA Male T1	SMA Male - Extended Base	(SMS Type)
21	SMA F T1	SMA Female - Flush Base	(SF Type)
22	SMA F T2	SMA Female - Recessed Insulator - No Cover Skirt (EFJ Type)	(SFJ Type)
23	SMA F T3	SMA Female - Recessed Insulator - Short Cover Skirt (Uniden Type)	(SFU Type)
24	SMA Male T2	SMA Male - Flush Base	(SM Type)

Center Cut Frequency Color Code

VHF (CENTER FREQ)		COLOR	UHF (CENTER FREQ)		COLOR	800/900 (CENTER FREEQ)		COLOR
144	(138-150)	Gray	420	(403-437)	Blue	832	(795-870)	Blue
152	(146-158)	Yellow	450	(432-468)	Yellow	918	(872-964)	Red
156	(150-162)	Orange	470	(450-490)	Red	1800	(1710-1850)	Black
160	(154-166)	Green	490	(470-510)	Green	1900	(1850-1990)	Black
167	(160-174)	Red				2400	(2400-2500)	Black

WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com