WISCO International (Kenwood/Amateur TM-V708A Specifications)

GENERAL
Guaranteed Range VHF Band A UHF Band B	TX & RX 144 – 148 MHz TX & RX 438 – 450 MHz
Frequency Range Band A Band B	TX 144 – 148 MHz RX 118 – 200 MHz TX (SUB UHF) 438 – 450 MHz RX (SUB UHF) 300 – 470 MHz RX 200 – 300 MHz TX 430 – 450 MHz RX 300 – 524 MHz TX (SUB VHF) 144 – 148 MHz RX (SUB VHF) 136 – 175 MHz RX 800 – 1300 MHz
Mode	F2D, F3E
Antenna Impedance	50Ω
Power Requirement	DC13.8V ±15% (minus)
Operating Temperature Range	-20° ~ +60° C
Frequency Stability	Within ±5ppm (-10°~ +50°C)
Current Drain	Transmit VHF HI MID LOW UHF HI MID LOW Receive	Less than 11.5A Less than 5.5A Less than 4.0A Less than 10.0A Less than 6.5A Less than 5.0A Less than 1.0A
Dimensions (W x H x D)	Without protrusions With protrusions	Panel 5.51” x 2.36” x 1.31” (140x60x33.3 mm) Body 5.51” x 1.58” x 7.68” (140x40x195 mm) Panel 5.51” x 2.36” x 1.94” (140x60x 9.3 mm) Body 5.51” x 1.61” x 7.68” (140x41x195 mm)
Weight (approx.)	Panel 0.41 bs. (180 g) Body 2.6 bs. (1.2 kg)
RECEIVER
Circuitry	Double Super Heterodyne
Intermediate Frequency	1st IF: 38.85 MHz (VHF), 45.05 (UHF) 2nd IF: 450 kHz (VHF), 455 kHz (UHF)
Sensitivity (12 dB SINAD)	VHF/UHF Less than 0.16µV SUB Band: VHF/UHF Less than 0.25µV
Squelch Sensitivity	VHF Less than 0.1µV UHF Less than 0.1µV
Selectivity	-6 dB: More than 12 kHz -40 dB: Less than 28 kHz
Low Frequency Output (8Ω)	More than 2W (at 5% distortion)
TRANSMITTER
RF Output Power	HI: 50W (VHF), 35W(UHF) MID: 10W (VHF/UHF) LOW: 5W (VHF/UHF)
Modulation	Reactance modulation
Maximum Frequency Deviation	Within ±5 KHz
Spurious Radiation	Less than -60 dB
Modulation Distortion (300Hz-3kHz)	Less than 3%
Microphone Impedance	600 Ω