WISCO International (Kenwood - TH-D7A Specifications

General
Antenna Impedance	50 Ohms
Current	Receive with no signals: Approx. 90 mA Battery Saver ON: Average 25 mA TNC ON: Approx 115 mA
Current (Cont'd)	Transmit with H, 13.8 V (DC IN): VHF (Approx. 1.6A) UHF (Approx. 1.7A) Transmit with H, 9.6 V (Battery Terminals): VHF (Approx. 1.6A) UHF (Approx. 1.7A) Transmit with H, 6.0 V (Battery Terminals): VHF (Approx. 1.3A) UHF (Approx. 1.4A) Transmit with
Dimensions (W x H x D)	54.0 x 119.5 x 43.5 mm (w/PB-39 installed)
Frequency Range	VHF Band (144-148 MHz) UHF Band (438-450 MHz)
Frequency Stability	-10 - +50�C (w/in �10 ppm) -20 - +60�C (w/in �15 ppm)
Ground Method	Negative
Maximum frequency deviation	Within �5 kHz
Microphone Impedance	2 kOhms
Mode	F3E (FM), F1D (GMSK), F2D (FSK)
Modulation	Reactance
Power Output	H, 13.8V: VHF (6W) UHF (5.5W) H, 9.6V: Approx. 5W H, 6.0V: VHF (Approx. 2.5W) UHF (Approx. 2.2W) L,6.0V: Approx. 0.5W EL, 6.0V: Approx. 50mW
Rated Voltage	External power supply (DC IN): 5.5 - 16.0 V (13.8 V) Battery Terminals: 4.5 - 15.0 V (6.0 V)
Spurious emissions (at high transmit power)	-60 dB or less
Usable Temperature Range	-20�C - +60�C (-4�F - +140�)
Weight	Approx 380g/13.4 oz. (w/PB-39 installed)
Receiver
1st Intermediate Frequency	VHF (38.85 MHz) UHF (45.05 MHz)
2nd Intermediate Frequency	VHF (450 kHz) UHF (455 kHz)
Audio output (10% distortion)	9.6V (battery terminals): 450 mW or higher (8 Ohms load) 6.0V (battery terminals): 300 mW or higher (8 Ohms load)
Circuitry	Double conversion superheterodyne
Selectivity (-40 dB)	28 kHz or more
Selectivity (-6 dB)	12 kHz or more
Sensitivity (12 dB SINAD)	0.18 uV or less
Squelch sensitivity	0.1 uV or less