WISCO International

Kenwood
For Export Only

Home Page | Manufacturers | Kenwood | TH-255A | Quotation | Search | E-mail

Specifications
General

Frequency Range*
TX
RX


144 - 148 MHz
136 - 174 MHz
Mode

F3E
Number of Channels

100 ch**
Power Requirements

DC 6.0 - 9.0 V (7.5 V nominal)
Antenna Impedance 50
Operating Temperature -10° to +50° C

Battery Life (5-5-90 duty cycle) [with PB-43N]
Hi
Low


8 hours
15 hours
Frequency Stability

±5 ppm

Dimensions [with PB - 43N]
(projections included)

58 x 120 x 28.4 mm
(58 x 129.7 x 37.8 mm )
Weight

375 g
Receiver

Circuitry

Double Super Heterodyne
Sensitivity (12dB SINAD) Less than 0.18 µV
Squelch Sensitivity Less than 0.13 µV

Selectivity
-6dB
-40dB


More than 10 kHz
Less than 28 kHz

Intermediate Frequency
1st IF
2nd IF


8.85 MHz
450 kHz
Spurious Response 55 dB
Audio Output More than 400 mW (10 % distortion)

Transmitter (Measurements made per TIA/EIA-603)

RF Power Output (approx.)
Hi / Low


5.5 W / 0.5 W
Modulation Reactance modulation
Spurious Emission Less than -60 dB
Maximum Frequency Deviation ±5 kHz
Audio Distortion Less than 3 %

*Guaranteed Range: 144-148 MHz
**Using memory names: 50 ch

Kenwood reserves the right to change specifications and features without prior notice.
 
Applicable MIL-STD
 
Standard MIL 810C
Methods/Procedures		 MIL 810D
Methods/Procedures		 MIL 810E
Methods/Procedures		 MIL 810F
Methods/Procedures
Low Pressure 500.1 / Procedure 1 500.2 / Procedure 1,2 500.3 / Procedure 1,2 500.4 / Procedure 1,2
High Temperature 501.1 / Procedure 1,2 501.2 / Procedure 1,2 501.3 / Procedure 1,2 501.4 / Procedure 1,2
Low Temperature 502.1 / Procedure 1 502.2 / Procedure 1,2 502.3 / Procedure 1,2 502.4 / Procedure 1,2
Temperature Shock 503.1 / Procedure 1 503.2 / Procedure 1 503.3 / Procedure 1 503.4 / Procedure 1,2
Rain 506.1 / Procedure 2 506.2 / Procedure 2 506.3 / Procedure 2 506.4 / Procedure 3
Humidity 507.1 / Procedure 2 507.2 / Procedure 2 507.3 / Procedure 2 507.4
Dust 510.1 / Procedure 1 510.2 / Procedure 1 510.3 / Procedure 1 510.4 / Procedure 1,3
Vibration 514.2 / Procedure 8,10 514.3 / Procedure 1 Cat 8 514.4 / Procedure 1 Cat 8 514.5 / Procedure 1 Cat 20
Shock 516.2 / Procedure 1,2 516.3 / Procedure 1,4 516.4 / Procedure 1,4 516.5 / Procedure 1,4
Wisco International - 690 W 28 St. Hialeah, FL 33010 USA
Telf. (305) 888-1676 - Fax (305) 887-1624 - E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | Kenwood | TH-255A | Quotation | Search | E-mail