WISCO International

Kenwood

Home Page | Manufacturers | Kenwood | TK-2212L/3212L | Quotation | Search | E-mail

Specifications
General

TK-2212

TK-3212
Frequency Range
Type 1
Type 2


136-174 MHz
-


450 ~ 490 MHz
470-512 MHz
Number of channels
Zone/Channel
Max. 128 per Radio / Max. 128 per Zone

Channel Spacing
Wide/Narrow

25, 30 kHz /12.5, 15 kHz

25 kHz /12.5 kHz

PLL Step

5 / 6.25 kHz 2.5 / 5 / 6.25 / 7.5 kHz
Battery Voltage 7.5V DC�20%
Battery Life (5-5-90 duty cycle, during hi-power, battery saver off)
with KNB-29N (1500mAh)
Approx. 12 hours
Operating temperature range

22�F ~ +140�F (-30�C ~ +60�C)
Frequency stability

�2.5ppm (-30�C ~ +60�C)
Antenna Impedance

50 Ω
Channel Frequency Spread
Type 1
Type 2


38 MHz


40 MHz
42 MHz
Dimensions (W x H x D)
Radio Only
with KNB-29N


2.13� x 4.8� x 1.19� (54 x 122 x 30.1 mm)
 2.13� x 4.8� x 1.65� (54 x 122 x 42 mm)
Weight (net)
Radio Only
with KNB-45L


6.3 oz (180 g)
13.4 oz (300 g)
FCC ID
Type 1
Type 2


ALH37683110
-


LH37693110
ALH37693120

FCC compliance
Type 1
Type 2


FCC parts 74/90
-


FCC parts 22/74/90/95
FCC parts 22/74/90
IC certification
Type 1


282D-37683110


282D-37693110
RECEIVER (EIA/TIA-603)
Sensitivity (12 dB SINAD)
Wide
Narrow

0.25 �V
0.28 �V
Selectivity
Wide
Narrow

70 dB
60 dB
Intermodulation distortion
Wide
Narrow

65 dB
60 dB
Spurious response

65 dB

60 dB
Audio output (8 Ω impedance)

 500 mW with less than 10% distortion
TRANSMITTER (Measurements made per TIA/EIA-603)
RF output power
High
Low


5 W
1 W


4 W
1 W
Spurious response

65dB
Type of Emission
Wide
Narrow

16K�F3E
11K�F3E

Deviation
Wide
Narr Narrow


�5 kHz
�2.5 kHz
FM HUM & Noise
Wide
Narrow

45 dB
40 dB
Audio distortion

Less than 5%
*+14�F ~ +140�F (-10�C ~ +60�C) when KNB-29N in use
Kenwood reserves the right to change specifications and features without prior notice.
FleetSync� is not compatible with FleetSync II offered in some Kenwood products.
FleetSync� is a registered trademark of Kenwood Corporation in the United States and/or other countries.
All other trademarks are property of their respective owners.
Applicable MIL-STD
Standard Methods/Procedures
MIL 810C		 Methods/Procedures
MIL 810D		 Methods/Procedures
MIL 810E		 Methods/Procedures
MIL 810F
Low Pressure 500.1/Procedure I 500.2/Procedure I,II 500.3/Procedure I 500.4/Procedure I, II
High Temperature 501 .I/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.I/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505. I/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.I/Procedure I, II 507.2/Procedure II,III 507.3/Procedure II, III 507.4
Salt Fog 509.I/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.I/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.4/Procedure I
Shock 516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.4/Procedure I, IV
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | Kenwood | TK-2212L/3212L | Quotation | Search | E-mail