WISCO International (Instek PSH Series)

FEATURES PSH Series

Wide Input Voltage Range and High Power Factor (P.F)
High Efficiency and High Power Density
Constant Voltage and Constant Current Operation
Over Voltage Over Current and Over Temperature Protection
Low Ripple and Noise
Standard Interface : RS-232C
Option : GPIB ( IEEE-488.2 )
Labview Driver
Output ON/OFF Control
Self-Test and Software Calibration
LCD Display
Built-in Buzzer Alarm

Output	10V	36A (PSH-1036)	70A (PSH-1070)	100A (PSH-10100)
	20V	18A (PSH-2018)	35A (PSH-2035)	50A (PSH-2050)
	36V	10A (PSH-3610)	20A (PSH-3620)	30A (PSH-3630)
	60V	6A (PSH-6006)	12A (PSH-6012)	18A (PSH-6018)
Regulation (CV)	Load	0.1% + 5mV	0.1% + 5mV	0.1% + 5mV
Regulation (CV)	Line	0.05% + 5mV	0.05% + 5mV	0.05% + 5mV
Regulation (CC)	Load	0.2% + 5mA	0.2% + 10mA	0.2% + 15mA
Regulation (CC)	Line	0.2% + 5mA	0.2% + 10mA	0.2% + 15mA
Ripple & Noise	Voltage (mVrms)	10 ~ 20mV	10 ~ 20mV	10 ~ 20mV
Ripple & Noise	Current (mArms)	0.2%	0.2% + 20mA	0.2% + 40mA
Resolution	Voltage < 36V	10mV	10mV	10mV
	Voltage > 36V	20mV	20mV	20mV
	Current 10V	10mA	20mA	30mA
	Current 20V	10mA	10mA	20mA
	Current 36V	10mA	10mA	10mA
	Current 60V	10mA	10mA	10mA
Program Accuracy	Voltage < 36V	0.05% + 25mV	0.05% + 25mV	0.05% + 25mV
	Voltage > 36V	0.05% + 50mV	0.05% + 50mV	0.05% + 50mV
	Current 10V	0.2% + 30mA	0.2% + 60mA	0.2% + 90mA
	Currnet 20V	0.2% + 30mA	0.2% + 30mA	0.2% + 60mA
	Current 36V	0.2% + 30mA	0.2% + 30mA	0.2% + 30mA
	Current 60V	0.2% + 30mA	0.2% + 30mA	0.2% + 30mA
Readback (METER) Resolution	Voltage	As Resolution	As Resolution	As Resolution
Readback (METER) Resolution	Current	As Resolution	As Resolution	As Resolution
Readback (METER) Accuracy	Voltage	As Program Accuracy	As Program Accuracy	As Program Accuracy
Readback (METER) Accuracy	Current	As Program Accuracy	As Program Accuracy	As Program Accuracy
Readback Temp. Coefficient	Voltage (25 + 5�C )	< 100ppm/�C	< 100ppm/�C	< 100ppm/�C
Response (Rise/Fall) Time	Voltage Up	< 150mS	< 150mS	< 150mS
Response (Rise/Fall) Time	Voltage Down	< 150mS	< 150mS	< 150mS
Recovery Time	CV Mode	< 500�S	< 500�S	< 500�S
Protection	OVP/OCP/OHP	-	-	-
Protection	Rush Current	-	-	-
Output On/Off Control		-	-	-
Display	LCD
Power Source	AC 85V ~ 250V, 50/60Hz
Accessories	Power cord x 1, Instruction Manual x 1
Dimensions & Weight		108(W) x 141(H) x 388(D)mm, 3.3kg	188(W) x 141(H) x 388(D)mm, 6.2kg	268(W) x 141(H) x 388(D)mm, 9.3kg