WISCO International (Instek GPC Series)

FEATURES

Triple Output
Four Digital Panel Meters (GPC-3030DQ)
Auto Tracking
Auto Series and Parallel Operation
Constant Voltage and Constant Current Operation
Low Ripple and Noise
3 1/2 Digits 0.39" LED Display GPC-3030DQ)
3 1/2 Digits 0.5" LED Display (GPC-1850D/3020D/3030D)
5V, 3A Fixed Output
Overload and Reverse Polarity Protection
Rotation Speed of the Fan is Controlled by Heatsink Temperature
(Only European Specification)(GPC-3030DQ)
Internal Select for Continuous or Dynamic Load

OPERATION MODE
Independent	Two independent outputs and 5V fixed output Output from 0 to rating volts and 0 to rating amperes
Series	Output from 0 to + rating volts at rating amperes each Output from 0 to double rating volts at rating amperes
Parallel	Output from 0 to double rating amperes at rating volts
5V FIXED OUTPUT
Regulation	Line regulation < 5mV Load regulation < 10mV
Ripple & Noise	< 2mVrms
Voltage Accuracy	5V + 0.25V
Output Current	3A
TRACKING OPERATION
Tracking Error	< 0.5% + 10mV of the master
Series Regulation	< 300mV
CONSTANT VOLTAGE OPERATION
Regulation	Line regulation < 0.01% + 3mV Load regulation < 0.01% + 5mV (rating current < 10A) < 0.02% + 5mV (rating current > 10A)
Ripple & Noise	< 1mVrms 5Hz ~ 1MHz
Recovery Time	< 100�S (50% Load change, Minimum load 0.5A)
CONSTANT CURRENT OPERATION
Regulation	Line regulation < 0.2% + 3mA Load regulation < 0.2% + 3mA
Ripple Current	< 3mArms
METER
Analog	V-meter and I-meter each one 2.5 class Dimension 50 x 50 mm
Digital	3 1/2 digits 0.5" LED display Accuracy + (0.5% of rdg + 2 digits)
INSULATION
Chassis and Terminal	100MΩ or above ( DC 1000V )
Chassis and AC Cord	100MΩ or above ( DC 1000V )
POWER SOURCE	AC 100V/120V/220V/240V+10%, 50/60Hz
ACCESSORIES	Instruction manual x 1, Power cord x 1 Test lead GTL-105 x 3 (<3A) or GTL-104 x 3 (<10A)
DIMENSIONS	255(W) x 145(H) x 420(D) mm