WISCO International (Instek GRS-6052A /GRS-6032A)

FEATURES GRS-6052A /GRS-6032A

ALT-MAG Function (x5, x10, x20)
RS-232C Interface
GRS-6052A : DC~50MHz Bandwidth, 100MSa/s, 2kW/CH x 2,
GRS-6032A : DC~30MHz Bandwidth, 100MSa/s, 2kW/CH x 2
Equivalent Time Sampling of 500MSa/s max.
Acquire Mode : Peak Detect, Envelop, Persistence
Pre-Trigger Function 0 ~ 10 div
ROLL Mode to 100s/div
Averaging Function (2 ~ 256)
Smoothing Function ON/OFF
Max. Sweep Rate 10ns/div
Waveform SAVE/RECALL 10 sets (REF0~REF9)
VERT Mode Triggering
Panel Setting SAVE/RECALL 10 sets (M0~M9)
Cursor Readout Function: V, T,1/ T

GRS-6000 Series provide Pre-Trigger function, which allows user to observe Pre-Trigger waveform up to 10 divisions ahead of the trigger point. GRS-6052A /GRS-6032A

The low-speed transient event of the input signal waveform will roll on from right to the left to show the updated input signal all the time could be viewed easily under ROLL Mode. The

With ALT-MAG function, the user could expand the waveforms by 5, 10, or 20 times for a more detailed waveform observation. Both original waveforms and expanded waveforms could be shown on the screen at the same time.

CRT

GRS-6052A
50MHz, 100MSa/s, 500MSa/s (ETS)

GRS-6032A
30MHz, 100MSa/s, 500MSa/s (ETS)

Type and Acceleration
ILLUM
Z-axis Input

6-inch CRT , 10kV
Front panel control
Sensitivity : at least 5V
Polarity : positive going input decrease intensity
Max. input voltage:30V(DC+ACpk)
Input Impedance :approx. 33kΩ

6-inch CRT , 2kV
Front panel control
Sensitivity : at least 5V
Polarity: positive going input decrease intensity
Max. input voltage:30V(DC+ACpk)
Input Impedance :approx. 47k Ω

VERTICAL SYSTEM

Deflection Coefficient
and Accuracy

Variable Continuously
Bandwidth (-3dB)

Vertical Mode
Chopper Frequency
Sum or Difference
Invert
Input Impedance
Input Coupling
Input Voltage

1mV ~ 2mV/div � 5%,
5mV ~ 20V/div � 3%,
14 steps in 1-2-5 sequence
2.5 : 1 ~ min. 50V/div
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz
CH1, CH2, DUAL (ALT or CHOP)
Approx. 250kHz
CH1+CH2, CH1-CH2
CH2
1M Ω � 2%//approx. 25pF
AC, DC, GND
Max. 400V(DC+ACpk)

1mV ~ 2mV/div � 5%,
5mV ~ 20V/div � 3%,
14 steps in 1-2-5 sequence
2.5 : 1 ~ min. 50V/div
1mV ~ 20mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz
Approx. 250kHz
CH1, CH2, DUAL (ALT or CHOP)
CH1+CH2, CH1-CH2
CH2
1M Ω �2%//approx. 25pF
AC, DC, GND
Max. 400V(DC+ACpk)

HORIZONTAL SYSTEM

Sweep Time
Variable Continuously
Accuracy

Sweep Magnification
Max. Sweep Time
ALT-MAG Function
HOLD-OFF Time

0.2 s/ 0.5s/ , 20 steps div div
2.5 : 1 up to 1.25s/ (uncal.) div
� 3%, � 5% at x5/ x10MAG. �8% at x 20MAG
x5, x10, x20
20ns/ div(10ns/div uncal)
Yes
Variable

0.2 s/ ~ 0.5s/ , 20 steps div div
2.5 : 1 up to 1.25s/DIV (uncal.)
� 3%, � 5% at x5/ x10MAG. � 8% at x 20MAG
x5, x10, x20
50ns/ div(10ns~40ns/div uncal)
Yes
Variable

TRIGGER

Trigger Mode
Trigger Source
Trigger Coupling
Trigger Slope
ALT Trigger
Indicator Trigger LED
TV Sync. Separator

AUTO, NORM, TV
VERT, CH1, CH2, LINE, EXT
AC, HFR, LFR
"+" or "-" polarity
Yes
Yes
TV-V "-" , TV-H "-"

AUTO, NORM, TV
VERT, CH1, CH2, LINE, EXT
AC, HFR, LFR
+ or - polarity
Yes
Yes
TV-V "-" , TV-H "-"

Trigger Sensitivity

External Trigger Input

GRS-6052A	20Hz ~ 2MHz	2MHz ~ 20MHz	20MHz ~ 30MHz
GRS-6032A	20Hz ~ 5MHz	5MHz ~ 40MHz	40MHz ~ 50MHz
CH1, CH2	0.5 div	1.5 div	2.0 div
VERT-MODE	2.0 div	3.0 div	3.5 div
EXT	200mV	800mV	1V

TV sync. pulse more than 1 or 200mV (EXT) DIV
Input impedance :Approx. 1M //25pF (AC coupling)
Max. input voltage :400V (DC + AC pk)

X-Y OPERATION}

Input
Sensitivity
Bandwidth
X-Y Phase Shift

X-axis : CH1 ; Y-axis : CH2
1mV/ ~ 20V/ div div
X-axis : DC ~ 500kHz (-3dB)
<3� from DC ~ 50kHz

DIGITAL STORAGE

Acquisition Digitizer
Max. Sampling Rate

Storage Bandwidth

Dynamic Range

8 bit ADC x 2
500MSa/s for equivalent time sampling
100MSa/s for normal sampling
Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz
� 5div

8 bit ADC x 2
500MSa/s for equivalent time sampling
100MSa/s for normal sampling
Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz
� 5div