WISCO International (Instek GOS-653G, GOS-652G)

CRT
Type Accelerating Potential Illumination Z-axis Input	6-inch rectangular type with internal graticule 0%, 10%, 90% and 100% markers. 8 x 10div (1div =1cm) 12kV Continuously adjustable Input Impedance: Approx. 5kΩ Sensitivity: Above 3Vp-p Bandwidth: DC ~ 5MHz
VERTICAL SYSTEM
Sensitivity Bandwidth Rise Time Signal Delay Input Impedance Input Coupling Vertical Mode	5mV/div ~ 5V/div �3%,1mV ~ 2mV/div �5% DC ~ 50MHz DC ~ 15MHz at 1 ~ 2mV/div 7ns (23.3ns for 1 ~ 2mV/div ) leading edge can be monitored(GOS-653G only) AC, DC, GND Approx. 1MΩ CH1, CH2, DUAL, ADD, CH2 INV (Dual automatic switching ALT and CHOP)
HORIZONTAL SYSTEM
A(main) Sweep Time B(delay) Sweep Time Delay Time Delay Time Jitter	0.1 �s ~ 0.5s/div 3% 100ns ~ 50ms/div �5% (x 10 MAG) 10ns ~ 50ns �8% (x 10 MAG) (GOS-653G only) 0.1 �s ~ 0.5ms/div �3% 100ns ~ 50 �s/ div�5% (x 10 MAG), 10ns ~ 50ns/div �8% (x 10 MAG) 1 �s ~ 5ms, �5% (GOS-653G only) Better than 1:10000 (GOS-653G only)
TRIGGER
Trigger Mode Trigger Source Trigger Coupling Trigger Slope	AUTO, NORM, SINGLE CH1, CH2, ALT, LINE, EXT AC, DC, HF REJ, TV "+" or "-"
X-Y OPERATION}
Sensitivity X-axis Bandwidth Phase Error	5mV ~ 5V/div �4% DC ~ 2MHz +_ 3� or less from DC ~ 100kHz (GOS-653G) 3� or less from DC ~ 50kHz (GOS-652G)
OUTPUT SIGNAL
Trigger Signal Output Calibrator Output	Voltage: approx. 50mV/div; into 50Ω 1kHz Square wave, 2Vp-p �2%
POWER SOURCE	AC 100V/120V/220V/230V �10%, 50Hz/60Hz
ACCESSORIES	Instruction manual x 1, GLF-190C Probes (10:1/1:1) x 2Power cord x 1,
DIMENSIONS & WEIGHT	310(W) x 150(H) x 455(D) mm; Approx. 8.2kg