WISCO International

Home Page | Products | Manufacturers | Instek | Quotation Request | Search | E-mail

GOS-635G(35MHz)/GOS-622G(20MHz)/GOS-620(20MHz)
Analog Oscilloscope
 
FEATURES
  • 35MHz Bandwidth, Dual Channel (GOS-635G)
  • 20MHz , Dual Channel (GOS-622G) Bandwidth
  • 20MHz , Dual Channel (GOS-620) Bandwidth
  • High Sensitivity 1mV/div
  • TV Synchronization
  • ALT Triggering Function
  • Z Axis Input
  • Hold Off Function (GOS-635G,GOS-622G)
  • CH1 Output

 

 

SPECIFICATIONS
 
CRT
Type
Z-axis input

6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm)
Input Impedance : Approx. 5kΩ
Sensitivity : Above 3Vp-p
Bandwidth : DC ~ 5MHz
VERTICAL SYSTEM
Sensitivity
Bandwidth

Rise Time
Input Impedance
Input Coupling
Vertical mode		 5mV ~ 5V / DIV +3%, 1mV ~ 2mV / DIV +5%
DC ~ 35MHz
DC ~ 10MHz at 1 ~ 2mV / DIV
10nS (35nS at 1mV ~ 2mV / DIV)
Approx. 1MΩ
AC, DC, GND
CH1, CH2, DUAL, ADD, CH2 INV
(Dual automatic switching ALT and CHOP)
HORIZONTAL SYSTEM
Sweep Time 0.1�S ~ 0.5S / DIV+3%；
100nS ~ 50mS / DIV+5% (x 10MAG)；
10nS ~ 50nS+8% (x 10MAG)
TRIGGER
Trigger Mode
Trigger Source
Trigger Coupling
Trigger Slope		 AUTO, NORM
CH1, CH2, ALT, LINE, EXT
AC, DC, HF, REJ, TV
"+" or   "-"
X-Y OPERATION
Sensitivity
X - axis Bandwidth
Phase Error		 5mV ~ 5V / DIV+4%
DC ~ 1MHz
3� or less from DC ~ 50kHz
OUTPUT SIGNAL
Trigger Signal Output
Calibrator Output		 Voltage : approx. 50mV/DIV into 50Ω
1kHz Square wave, 2Vpp+2%
POWER SOURCE AC 100V / 120V / 220V / 230V+10%, 50 / 60Hz
ACCESSORIES Power cord x 1,
Instruction manual x 1,
Probes (10  1/1 :1)x2
DIMENSIONS & WEIGHT 310(W) x 150(H) x 455(D) mm; Approx. 8.2kg
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Products | Manufacturers | Instek | Quotation Request | Search | E-mail