WISCO International (Instek GOS-620FG)

CRT
Type Accelerating Potential Z-axis input Polarity Focus Control	6-inch rectangular type with internal graticule 8 x 10 DIV (1 DIV=1 cm) 2 kV Sensitivity: Above 5Vpp Max. input voltage：30V (DC+ AC peak) Bandwidth: DC ~ 2MHz Positive-going input decrease Auto focus
FUNCTION GENERATOR
Frequency Range Waveform Frequency Variable Range Output Impedance Voltage Sinewave Distortion Squarewave Unsymmetry Squarewave Rise/Fall Time	0.1Hz ~ 1MHz (7range) Sine Wave, Square Wave, Triangle Wave 10：1 or more 50Ω +10% Over 14Vpp (open circuit) continuous conversion DC offset possible over + 6V when open 2% Max. (10Hz ~ 100kHz) +3% or less (in 1kHz maximum) 50Ω output：120nS or less
VERTICAL SYSTEM
Sensitivity Bandwidth Rise Time Max. Input Input Coupling Input Impedance Vertical Mode	5mV ~ 5V/DIV+3%, 1mV ~1V/DIV+5% (using x 5MAG) DC to 20MHz (x 5MAG：DC to 7MHz) Approx. 17.5nS (x 5MAG：Approx. 50nS) 300V (DC+AC peak) at 1kHz AC, DC, GND Approx. 1MΩ// 25pF CH1, CH2, DUAL(ALT, CHOP), ADD, CH2 INV
HORIZONTAL SYSTEM
Sweep Time Max. Sweep Rate	0.2�S / DIV ~ 0.5S / DIV+3%, (+5% at x 10MAG) 100nS / DIV (20nS and 50nS / DIV are uncalibrated)
TRIGGER
Trigger Mode Trigger Source Trigger Slope	AUTO, NORM, TV-V, TV-H CH1, CH2, ALT, LINE, EXT "+" or "-"
X - Y OPERATION
Sensitivity X - axis Bandwidth Phase Error	5mV ~ 5V / DIV+4% DC ~ 500kHz 3� or less from DC ~ 50kHz
OUTPUT SIGNAL
Trigger Signal Output Calibrator Output	Voltage: approx. 20mV / DIV into 50Ω Bandwidth: 50Hz to 5MHz (-3dB) Impedance: Approx. 50Ω 1kHz Squarewave, 2Vpp+2%
POWER SOURCE	AC 115V / 230V + 15%, 50/60Hz
ACCESSORIES	Power cord x 1, Instruction manual x 1, Probes(10:1/1:1) x 2,
DIMENSIONS & WEIGHT	310(W) x 150(H) x 455(D) mm；Approx. 8.5kg