WISCO International

Home Page | Products | Manufacturers | Instek | Quotation Request | Search | E-mail

GFG-8255A
Function Generator

 
GFG8250A GFG8255A
 
FEATURES
  • Frequency Range: 0.5Hz ~ 5MHz
  • Waveforms: Sine, Triangle, Square, Ramp, TTL and CMOS Output
  • External Voltage Controlled Frequency (VCF) Function
  • Duty Cycle Control with Signal Inversion Capability
  • Variable DC Offset Control
  • Two-Step (-20dBx2) and Variable Attenuator
  • Built-in 6 Digit Counter with INT/EXT Function Up to 150MHz / High Resolution
  • INT/EXT AM/FM Modulation (GFG-8255A)
  • LIN/LOG Sweep Mode (GFG-8255A)
  • GCV Output for Synchronization (GFG-8255A)

SPECIFICATIONS

 
Main  
Frequency Range 0.5Hz to 5 MHz (7 ranges)
Amplitude >10Vp-p (into 50Ω load)
Impedance 50Ω +10%
Attenuator -20dB+1dB x 2
DC Offset <-5V ~ >5V (into 50Ω load)
Duty Control 80% : 20% : 80% to  1MHz Continue variable
Display 6 digit LED display
Sine Wave 
Distortion <1%, 0.5Hz ~ 100kHz
Flatness <0.3dB, below 500kHz; <1dB, below 5MHz
Triangle Wave 
Linear >98%, 0.5Hz ~ 100kHz; >95%, 100kHz ~ 5MHz
Square Wave 
Symmetry +2%, 1Hz ~ 100kHz
Rise or Fall Time < 50nS at maximum output (into 50Ω load)
CMOS Output 
Level 4Vpp+1Vpp ~ 14.5Vpp+0.5Vpp adjustable
Rise or Fall Time <120nS
TTL Output 
Level >3Vpp
Fan Out 20 TTL load
Rise/Fall Time <25nS
VCF 
Input Voltage 0V~10V �1V(100 : 1)
Input Impedance 10kΩ �10%
GCV 
Output Voltage To set the voltage between 0V ~ 2V as per different frequency
Sweep Operation 
Sweep/Manual Switch selector
Sweep/Rate 100 : 1 ratio max. and adjustable
Sweep/Time 0.5sec. ~ 30sec. adjustable
Sweep/Mode Lin./Log. switch selector
Amplitude Modulation
Depth 0 ~ 100%
MOD. Frequency 400Hz (INT), DC ~ 1MHz(EXT)
Carrier BW 100Hz ~ 5MHz (-3dB)
EXT Sensitivity <10Vpp for 100% modulation
Frequency Modulation
Deviation 0 ~ + 5%
MOD. Frequency 400Hz(INT), DC ~ 20kHz(EXT.)
EXT. Sensitivity <10Vpp for 10% modulation
Frequency Counter 
INT./EXT. Switch selector
Range 0.5Hz ~ 5MHz (5Hz ~ 150MHz EXT.)
Accuracy Timebase accuracy �1 Count
Timebase �20ppm (23�C�5�C) after 30 minutes warm up
Resolution The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz
Input Impedance 1MΩ//150pF
Sensitivity <35mVrms (5Hz ~ 100MHz);< 45mVrms (100MHz ~ 150MHz)
Power Source AC 115V/230V�15%, 50/60Hz
Accessories Power cord � 1,
Instruction manual � 1,
GTL-101 � 2
Dimensions & Weight 251(W) � 91(H) � 291(D) mm, Approx. 2.4kg
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Products | Manufacturers | Instek | Quotation Request | Search | E-mail