WISCO International

Home Page | Products | Manufacturers | Instek | Quotation Request | Search | E-mail

GFG-8210 (10MHz)
Function Generator
 
FEATURESGFG-8210
  • Frequency Range: 0.1Hz ~ 10MHz
  • Waveforms: Sine, Triangle, Square, Ramp, TTL and CMOS Output
  • External Voltage Controlled Frequency (VCF) Function
  • Duty Cycle Control with Signal Inversion Capability
  • Variable DC Offset Control
  • Two-Step (-20dBx2) and Variable Attenuator
  • Built-In 6 Digit Counter with INT/EXT Function Up to 150MHz / High Resolution
  • LIN/LOG Sweep Mode

SPECIFICATIONS
 
Main 
Frequency Range 0.1Hz ~ 10MHz (8 ranges)
Amplitude >10Vp-p (into 50Ω load)
Impedance 50Ω+10%
Attenuator -20dB+1dB x 2
DC Offset <-5V ~ >5V( into 50Ω load)
Duty Control 15% : 85% : 15% to  1MHz Continue variable (square wave only)
Display 6 digits LED display
Sine Wave
Distortion 1% typical
Flatness + 0.45dB (+5%)
Triangle Wave 
Linear >98%  to 100kHz
Square Wave 
Symmetry +2%, 1Hz ~ 100kHz
Rise or Fall Time < 35nS
CMOS Output 
Max. Frequency 2MHz
Level <4Vpp ~ 14.5Vpp+0.5Vpp adjustable
Rise or Fall Time <120nS
TTL Output 
Level >3Vpp
Rise or Fall Time <20nS
VCF 
Input Voltage 0V~10V � 1V(100 : 1)
Input Impedance 10kΩ �10%
Sweep Operation 
Sweep/Manual Switch selector
Sweep/Rate >100 : 1 ratio max. and adjustable
Sweep/Time 0.5sec. ~ 30sec. adjustable
Sweep/Mode Lin./Log. switch selector
Sweep/Out 0V ~ 10+1V
Frequency Counter 
INT./EXT. Switch selector
Range 0.1Hz ~ 10MHz (5Hz ~ 150MHz EXT.)
Accuracy Timebase accuracy �1 count
Timebase �20ppm (23�C�5�C) after 30 minutes warm up
Resolution The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz
Input Impedance 1MΩ//150pF
Power Source AC 115V/230V�15%, 50/60Hz
Accessories Power cord � 1,
Instruction manual � 1,
GTL-101 � 2
Dimensions & Weight 251(W) � 91(H) � 291(D) mm, Approx. 2.2 kg
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com
 

Home Page | Products | Manufacturers | Instek | Quotation Request | Search | E-mail