WISCO International (Instek GSP-810)

FEATURES

Frequency Range : 150kHz ~ 1000MHz
Fully Digital Phase Locked Loop Technique Design
High Frequency Stability : �10ppm
High Resolution of Span to Measure the more detailed signal :Zero, 2kHz ~ 100MHz /DIV
RBW : 3k, 30k, 220k, 4M
High Input Protection Level : +30dBm, �25VDC
Reference Level Range : -30dBm ~ +20dBm Good Noise Floor Performance : -95dBm @30kHz, -100dBm typical over -150dBm/Hz typical @220kHz and 4MHz RBW
Two Markers for Absolute and Relative Measurement
Functions : Max. Hold, Average (2 ~ 32 traces), Freeze, Peak Search, Marker to Center Function
9 Memories of Save/Recall
RS-232 Interface and Display Software to get Trace from GSP-810 to PC
Options :Power Meter, Tracking Generator, Remote Control Software

FREQUENCY
Frequency Range	150kHz ~ 1 GHz
Aging Rate	�10ppm, 0~50 C, �2ppm/yr
Span Range	Zero, 2kHz~100MHz/div in 1-2-5 sequence
Phase Noise	-77dBc/Hz @ 1GHz 30kHz offset
Frequency Resolution	1kHz C.F. entry, 40Hz sweep resolution at 2kHz/div
Frequency Display	6 1/2 digit setting
Frequency Control	Digital phase locked
RESOLUTION BANDWIDTH
Resolution Bandwidths	3kHz,30kHz, 220kHz, 4MHz
Resolution BW Accuracy	15%
Video Bandwidth	1.6kHz/90kHz coupled with RBW
AMPLITUDE
Measurement Range	-100dBm~+20dBm
Overload Protection	+30dBm continuous, 25VDC
Reference Level Range	-30dBm~+20dBm
Amplitude Display Range	75dB
Amplitude Accuracy	�1.5dB typical @ 0dBm, 80MHz
Frequency Flatness	�1.5dB over 100MHz, �2.5dB typical over entire band/ �3dB:150kHz~10MHz
Amplitude Level Linearity	�1.5dB over 70dB
DYNAMIC RANGE
Average Noise Floor	-95dBm @30kHz RBW, -100dBm typical /-75dBm: 150kHz~10MHz
Third Inter-Modulation	<-70dBc, @-40dBm input, 2tones, 2MHz apart/ <-45dBc:150kHz~10MHz
Harmonic Distortion	<-40dBc, RF input < selected reference
Non-Harmonic Spurious	<-60dBc typical down from reference level,average, 5MHz/div
DISPLAY SYSTEM
Display Device	CRT Display, 8 x 10 graticule, 6-inch waveform screen
Display Function	LCD Display, 4 line x 20 character data screen Center Frequency Control, Bandwidth, Reference Level, Span Range, Amplitude
FUNCTIONS
Marker Mode	Absolute, relative, PK->marker, marker->center
Number of Markers	2
Marker Resolution	0.1dB, 1kHz
Marker Accuracy	0.1dB amplitude accuracy
Memory	9 memories of save/recall
Trace	Max. hold, average(2~32 traces), freeze (Hold)
Setup	Access parameters