WISCO International

IDA Corporation

Home Page | Manufacturers | IDA | Trunking Radio | Quotation | Search | E-mail

LTR� Conversion for Motorola Mobiles

IDA CORPORATION offers LTR conversion kits for various Motorola and Motorola Radius mobile radios. Popular mobile radio models in the 400 MHz, 800 MHz, and 900 MHz bands can be changed to LTR trunking format.

Take advantage of the opportunities created by today’s rapidly changing marketplace.

bullet Load your LTR system with customers displaced by the Digital SMR buildout.
bullet Convert your mobiles to use efficient LTR trunking as well as CTCSS/CDCSS.
bullet ransition customers that have outgrown their own radio system to your LTR service.

CVT� FEATURES

PROGRAMMABLE

bullet Trunked or conventional programmable by system
bullet Group scan list programmable from the front cover with 10/10 front cover
bullet Programmable transmit time-out timer
bullet Programmable acquisition and private group alert tones on trunked systems
bullet Audio Compandering programmable per system (CVT-2-900 only)
bullet Fully programmable system and group scan: including revert system and group, dwell and time-out times
bullet Interconnect, Transpond, External Alarm and Call Indicator programmable per group
bullet Block Encode/Decode and Transmit Inhibit Blocks programmable per group
bullet Up to 10 systems and 10 groups per system depending on front cover
bullet Off-hook scanning

CONVENTIONAL

bullet Talkaround available on conventional systems with appropriate RF Board
bullet Microphone hook allows you to monitor channel in conventional systems
bullet CTCSS, CDCSS and noise squelch available on conventional systems
bullet Fully automated channel acquisition and DTMF dialing on interconnect calls including a 7-digit access code on conventional systems * 3 Ten 17-digit phone number memory locations for use with autodial

Handset hook allows you to monitor channel in conventional systems, contains Enable/Disable external alarm and Overdial available on all interconnect calls (phone only) * Not supported by CVT-2S or 2E

TECHNICAL REQUIREMENTS

bullet Working knowledge of servicing procedures and programming of Two Way radios.
bullet Mobile radio must be in good operating condition.
bullet Logic board part number to ensure correct firmware when ordering conversion kit.
bullet SMT repair capability (CVT-2S only).

CONVERSION KITS

CVT-2
Socket style EEPROM replacement conversion for MAXTRAC and RADIUS mobiles.
Requires: PGM-2 programmer.

CVT-2E
Socket style EEPROM replacement conversion for MAXTRAC and RADIUS mobiles. This unit corresponds to logic board HLN5173 only and allows the conversion of the radio without upgrading the board to an HLN5172.

CVT-2S
Surface mount microprocessor replacement conversion for MAXTRAC and RADIUS mobiles. This unit will convert logic boards HLN9123 and HLN8074 only.

Requires: PGM-2 programmer and SMT rework capabilities. PGM-2 Programmer

NEW FEATURES

bullet Programming of Auxiliary Pins if applicable.
bullet Programmable channel splits (UHF only cuts number of systems in half).

CVT PRODUCTS

RADIO

FREQUENCY

PART NUMBER

MAXTRAC and RADIUS 400     431-CVT-2-400
    431-CVT-2S-400
    431-CVT-2E-400
MAXTRAC 800     431-CVT-2
    431-CVT-2S
    431-CVT-2E
MAXTRAC

900

    431-CT-2-900
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | IDA | Trunking Radio | Quotation | Search | E-mail