WISCO International

Home Page | Manufacturers | ICOM | IC-F50/60 | Quotation Request | Search | E-mail

IC-F50/IC-F60
SPECIFICATIONS
General
Frequency Range
IC-F50
IC-F60
136-174MHz
 400-470MHz
450-512MHz (U.S.A.)
450-520MHz (General)
Number of channels Max. 128 channels / 8 banks
Channel spacing 12.5/25kHz, 15/30kHz
Antenna impedance 50Ω (SMA Type)
Frequency error ±2.5ppm
PLL channel step 
IC-F50
IC-F60
2.55/3.125kHz
 5/6.25kHz
Power supply requirement 7.2V DC
Current drain (approx.) 
Transmit


Receive
at 5W
 at 4W
at 1W		 1.5A (IC-F50)
 1.5A (IC-F60)
0.7A (IC-F50)
0.8A (IC-F60)
AF Max.
 Stand-by 		 300mA
 85mA
Operating temperature range -30°C to +60°C;
 -22°F to +140°F
Dimensions (W x H x D)
(projections not included)		 56 x 97 x 36.4mm;
27/32 x 313/16 x 17/16 in.
Weight (approx.; with BP-227) 280g; 9.9oz
Transmitter
Output power 
IC-F50
IC-F60
5.0W
 4.0W
Modulation system Variable reactance frequency modulation
Max. frequency deviation  ±5kHz (wide)
±2.5kHz (narrow)
Modulation limiting 60-100% of Max. deviation
Audio harmonic distortion 3% typ. (AF 1kHz, 40% deviation)
Spurious emissions 70dB Min.
Adjacent channel power  70dB Min. (wide)
60dB min. (narrow)
FM Hum and Noise  46dB typ. (wide)
40dB typ. (narrow)
External MIC impedance 9-pin multi connector/2.2kΩ
Receiver
Sensitivity (12dB SINAD) Less than 0.25 µV
SQL sensitivity 0.25µV typ. (at threshold)
Adjacent channel selectivity 75dB typ. (wide)
65dB typ. (narrow)
Spurious response 70dB
Intermodulation 74dB typ.
Hum and noise 45db typ. (wide)
40dB typ. (narrow)
Audio output power 0.5W typ. at 10% distortion with an 8Ω load
External SP connector 9-pin multi connector/8Ω
Applicable U.S. Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.
 
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Method Proc. Method Proc. Method Proc. Method Proc.
Vibration 514.2 X 514.3 I 514.4 I 514.5 I
Shock 514.6 I,II,IV 516.3 I, IV 516.4 I,IV 516.5 I,IV
 
Supplied Accessories
 
  • Battery pack, BP-227
  • Alligator-type belt clip
  • Antenna (Length may differ according to version)

Options
 
  • BP-226 BATTERY CASE:  Battery case for R6 (XX) x 5 alkaline cells.  BP-226 is Water-resistant, equivalent to JIS Grade 4, 1W output power.
  • BP-227 Li-Ion BATTERY PACK:  7.2V/1700mAh.  Provides 10 hours operating time* (approx.)  Operating temp. range: -20°C to +60°C; -4°F to +140°F. *(Tx: Rx: standby=5:5:90), output power: F50 5W, F60 4W.
  • BC-152 DESKTOP CHARGER + BC-147A/E AC ADAPTER: Regularly charges the battery pack, BP-227 in 9-10 hours.
  • BC-119N DESKTOP CHARGER + AD100 CHARGER ADAPTER + BC-145A/E/V AC ADAPTER: Rapidly charges the BP-227 in 2.5-3 hrs.
  • BC-121N MULTI-CHARGER + AD100 CHARGER ADAPTER + BC-124 AC ADAPTER: Rapidly charges up to 6 battery packs (Six AD-100s are required) in 2.5-3 hours.
  • HM-138 SPEAKER MICROPHONE:  Full sized, water-proof construction corresponds to JIS Grade 7. (1m/30 min.).
  • MB-86 BELT CLIP: Swivel Type.  Prevents accidental dropping from your belt.
  • MB-98 BELT CLIP: Alligator type. Same as supplied.
  • MB-96F BELT HANGER: Leather belt hanger.  For use with MB-98.
  • CP-17L CIGARETTE LIGHTER CABLE WITH NOISE FILTER: For use with the BC-152 or BC-119N.  (12-16 V DC required)
  • OPC-515L DC POWER CABLE: For use with the BC-152 or BC-119N.  (12-16 V DC required)
  • OPC-656 DC POWER CABLE: For use with the BC-121N. (12-20V DC required)
  • OPC-966 RS-232C: Interface cable for connecting with PC.
  • FA-S24V ANTENNA:  136-150 MHz (Blue ring)
  • FA-S59V ANTENNA:  150-174 MHz (Red ring)
  • FA-S27U ANTENNA:  400-470 MHz (Green ring)
  • FA-S56U ANTENNA:  450-520 MHz (Red ring)
  • FA-S74U ANTENNA:  490-520 MHz (Blue ring)
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com