WISCO International (ICOM- IC-F43TR Specifications)

IC-F43TR
Specifications

General

Frequency range

: 400-470 MHz
: 450-512 MHz

Channel spacing

: 12.5kHz
25kHz

Antenna impedance

: 50Ω

Frequency error

: ±2.5ppm

PLL channel step

: 5/6.25KHz

Power supply requirements

: 7.2V DC

Current drain (approx.)

: Transmit
Receive

at 4W
at 1W
AF max.
Stand-by

1.7A
0.7A
300mA
85mA

Operating temperature range

: –30°C to +60°C; –22°F to +140°F

Dimensions (With BP-232)
(projections not included)

: 53 × 120 × 36.5mm; 2³/₃₂ × 4²³/₃₂ × 1⁷/₁₆ in.

Weight (approx.)

: 320g; 11.3oz

Transmitter
Output power	: 4W, 1W
Max. frequency deviation	: ±5kHz (wide) ±2.5kHz (narrow)
Modulation limiting	: 60-100% of Max. deviation
Audio harmonic distortion	: 3% typ. (AF 1kHz, 40% deviation)
Spurious emissions	: 70dB Min.
Adjacent channel power	: 70dB Min. (wide) 60dB Min. (narrow)
External microphone impedance	: 3-conductor 2.5 (d) mm (¹⁄₁₀") / 2.2kΩ

Receiver
Sensitivity (12dB SINAD)	: 0.25µV typ.
Squelch sensitivity	: 0.25µV typ. (at threshold)
Adjacent channel selectivity	: 75dB typ. (wide) 65dB typ. (narrow)
Spurious response	: 70dB
Intermodulation	: 74dB typ.
Hum and noise	: 45db typ. (wide) 40dB typ. (narrow)
Audio output power	: 0.5W typ. at 5% distortion with an 8Ω load
External SP connector	: 2-conductor 3.5 (d) mm (¹⁄₈") / 8Ω

Applicable U.S. Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard	MIL 810C		MIL 810D		MIL 810E		MIL 810F
Standard	Method	Procedure	Method	Procedure	Method	Procedure	Method	Procedure
Vibration	514.2	X	514.3	I	514.4	I	514.5	I
Shock	516.2	I, II,IV	516.3	I, IV	516.4	I, IV	516.5	I,IV

Measurements made in accordance with EIA/TIA-603. All stated specifications are typical and subject to change without notice or obligation.

Options

BP-230/231/232 Battery Packs

Battery packs	Type and capacity	Operating time*
BP-230	Li-Ion 7.4V/ 800mAh	4 hours
BP-231	Li-Ion 7.4V/1150mAh	6 hours
BP-232	Li-Ion 7.4V/2000mAh	11 hours

* Operating time is approximate time (at 20°C).
Tx: Rx: standby=5:5:90.

BC-119N Rapid Charger
Rapidly charges the battery pack. AD-106 (Charger adapter) is required.

BC-145A/E/V AC Adapter

BC-121N Multi-Charger
Rapidly charges up to 6 battery packs (Six AD-106s are required).

HM-46L Speaker-Microphone
Compact and lightweight. Equipped with an earphone jack.

HM-131L Speaker-Microphone
Durable body. Equipped with an earphone jack and revolving clip.

HS-94 Headset
Earhook headset with flexible boom microphone.

HS-95 Headset
Behind-the-head headset with flexible boom microphone.

HS-97 Headset
Throat microphone fits around your neck and picks up speech vibration.

VS-1L PTT/VOX Unit
PTT/VOX unit. Required when using these headsets with the transceiver.

HS-51 Headset
For hands-free operation. Includes VOX, PTT and gone-touch PTT with a time-out timer.

MB-93 Belt Clip
Swivel type. Prevents accidental dropping from your belt.

MB-94 Belt Clip
Alligator type. Same as supplied.

MB-96 Leather Belt Hanger
Swivel type belt hanger. Swivel joint of the MB-93 required.

MB-96F Leather Belt Hanger
Fixed type belt hanger. For use with MB-94.

UT-108 DTMF decoder
Provides DTMF Selective call and ANI capabilities.

UT-109/110 Voice Scrambler Unit
UT-109 (Version 02) : Up to 32 scrambling codes are available.
UT-110 (Version 02) : Rolling type voice scrambler. Available in conventional mode only.

UT-113 Man Down Unit
Provides a man down function.

FA-SC73US Stubby Antenna
60 mm stubby antenna. Frequency range: 450–490MHz
• FA-SC25U: 400–430MHz
• FA-SC57U: 440–470MHz
• FA-SC72U: 470–520MHz

AD-98FSC Antenna Connector Adapter
BNC-type antenna adapter. (For maintenance use only)

SP-13 Earphone
Provides clear audio in noisy environments.

WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com