WISCO International

Home Page | Manufacturers | ICOM | Specifications | Quotation Request | Search | E-mail

VHF AND UHF TRANSCEIVERS
IC-F3021T, IC-F3021S / IC-F4021T, IC-F4021S

When You Need More Than a Basic Radio

IC-F3021 / IC-F4021Only Icom quality can offer this simple to use but versatile rich featured radio. In this compact light weight body, many attractive features such as multiple signaling, large capacity Lithium-Ion battery and wide frequency coverage are built-in. This rugged handheld easily exceeds your expectations with reliable performance and communication quality.

Compact lightweight body
The rounded compact* design fits comfortably in your palm and is light-weight** for carrying around all day. The large size programmable buttons have ample button-pitch to allow blind touch operation.
* 53(W)×120(H)×36.9(D) mm; 23/32× 423/32×17/16 in
** 296g; 10.4oz including BP-232N

IP54 dust-protection and splash resistance
The IC-F3021 series meets IP54 requirements for dust-protection and splash resistance. The aluminum die-cast chassis is the basis for this rugged construction, allowing long-life usage in various environments.

128 memory channels
and button control memory channel
The IC-F3021 series has 128 memory channels with 8 zones. Memory channel selection can be made easily with the up/down buttons laid out below the PTT button.

Most popular signalings built-in
Use the built-in 2-Tone, 5-Tone, CTCSS and DTCS capabilities as standard to set up your own talk groups and quiet stand-by when others are talking.

Multiple 2-Tone, Multiple 5-Tone
Up to ten 2-Tone and eight 5-Tone codes can be decoded on a channel. When a matched tone is received, the following items are programmable for each code.

  • Beep sound
  • Answer back
  • Scan
  • Bell icon
  • Radio stun/kill

Lithium-Ion battery standard
Supplied 2000mAh Li-Ion battery pack, BP- 232N, provides 15.5 hours* of operating time. Li-Ion batteries have virtually no memory issues and allows you flexible charging.
* Typical operation; Tx:Rx:Standby=5:5:90, power save on

8 programmable buttons
The [P0]–[P3], [▲], [▼], [Monitor] and [Red] buttons are programmable to meet specific needs. The [Red] button on the top panel can be assigned as an emergency trigger.

Alphanumeric display
The 8-character alphanumeric display shows channel, zone, tone code and scanning channel names on the display. A separate row of operational icons indicate battery, signal strength, RX/TX and other radio conditions.

Wide frequency coverage
The IC-F3021 series covers a wide frequency range with one version (136–174, 400–470, 450–512 (520) MHz). Wide and narrow channel spacing (25, 12.5kHz) is programmable per channel.

Optional board
The IC-F3021 series has a 40-pin expansion socket for adding an optional board. A voice scrambler provides secure conversation and the DTMF decoder features has ANI capability, depending on the installed board.

Optional VOX headset
With one of Icom’s optional headsets and PTT/VOX unit, the IC-F3021 series offers hands-free operation.

Other features

  • New regular charger, BC-171

  • TOT function and lock out penalty timer

  • 8 DTMF autodial memories

  • 2 step power saver

  • Surveillance function temporarily turns off the LED backlight and beep sound

  • Normal and priority scan

  • 500mW loud and clear audio

  • Embedded ESN (Electronic serial number)

WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | ICOM | Specifications | Quotation Request | Search | E-mail