WISCO International

Home Page | Manufacturers | ICOM | IC-F11 | Quotation Request | Search | E-mail

IC-F11, IC-F11S / IC-F21, IC-F21S
SPECIFICATIONS
 
General
Frequency coverage IC-F11/IC-F11S : 146–174
IC-F21/IC-F21S : 400–430 / 440–470
Channel spacing 12.5/25 kHz
Number of channels 16 (rotary type)
4 (toggle type)
PLL channel step 2.5kHz, 3.125kHz (VHF)
5kHz, 6.25kHz (UHF)
Power supply requirement 7.2V DC
Current drain (approx.) Tx High (5W/4W) : 1.6A
Rx Rated audio : 250mA
Standby 70mA

Frequency stability

±5ppm (VHF), ±2.5ppm (UHF)
Transmitter
Output power (at 7.2 V DC): 

5W, 2W or 1W (VHF)
4W, 2W or 1W (UHF)
Max. frequency deviation: ±5.0 kHz (at 25 kHz)
±2.5 kHz (at 12.5 kHz)
Spurious emissions 73 dB typ.
Adjacent channel power 70 dB typ. (at 25 kHz)
60 dB typ. (at 12.5 kHz)
External mic. connector 3-conductor 2.5 (d) mm (1 /10") / 2.2 kOhms
Receiver
Sensitivity : 0.25 µV typ. (at 12 dB SINAD)
Squelch sensitivity : 0.3 µV typ. (at threshold)
Adjacent channel selectivity: 70 dB typ. (at 25 kHz)
65 dB typ. (at 12.5 kHz)
Spurious response rejection : 70 dB typ.
Intermodulation rejection : 70 dB typ.
Audio output power (at 7.2V DC) : 500 mW (typical at 5%  distortion with an 8 ohm load)
External speaker connector : 2-conductor 3.5 (d) mm (1/8") / 8 ohms
 
Varies according to versions.
Measurements made in accordance with EAIA-152-C/204D or TIA-603.

All stated specifications are subject to change without notice or obligation. Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows.

Standard

 MIL 810C MIL 810D MIL 810E MIL 810F
Method Proc. Method Proc. Method Proc. Method Proc
Low Pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II
High Temp. 501.1 I 501.2 I, II 501.3 I, II 501.4 I, II
Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4 I, II
Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I
Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I
Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, II
Humidity 507.1 I, II 507.2 II, III 507.3 I, III 507.4 -
Salt Fog 509.1 I 509.2 I 509.3 I 509.4 -
Dust 510.1 I 510.2 I 510.3 I 510.4 I
Vibration 514.2 VIII, X 514.3 I 514.4 I 514.5 I
Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV 516.5 I, IV
 
Options
 
BATTERY PACKS AND CASE
 
  BP-208 BP-209 BP-210 BP-2211 BP-222
Output Power 1W typ. 5/4W typ. 5/4W typ. 5/4W typ. 5/4W typ.
Battery Life - 8.5 hours 13hours 14hours 4.5hours


BC-146 DESKTOP CHARGER + BC-147A/E AC ADAPTER
Charges the Ni-Cd or Ni-MH battery pack, BP-209, BP-210, BP-222 with/without transceiver in 12, 18.5, 6.5 hours (approx.), respectively. The BC-147 AC adapter is additionally required. Cannot charge Li-Ion battery pack, BP-211.

BC-144 DESKTOP CHARGER + BC-145A/E/V AC ADAPTER
For rapid charging of battery pack, BP-209, BP-210 or BP-222. An AC adapter, BC-145, is supplied with the charger depending on version. Charging time: 1.5 to 2 hours. Cannot charge Li-Ion battery pack, BP-211.

BC-119N+AD-101+BC-145A/E/V
rapidly charges BP-211 as well as other battery packs.

BC-121N MULTI-CHARGER + AD-101 CHARGER ADAPTER + BC-124 AC ADAPTER
For rapid charging of up to 6 battery packs (Six AD-101s are required), BP-209, BP-210, BP-211 or BP-222. An AC adapter, BC-124, may be supplied, depending on version. Charging time: 1.5 to 2 hours.

AD-98FSC ANTENNA CONNECTOR ADAPTER
Allows you to connect a BNC-type antenna. (For maintenance use only)

MB-74 BELT CLIP
Alligator type.

MB-68 BELT CLIP
Same as that supplied.

OPC-656 DC POWER CABLE
For use the BC-121N with a DC power supply (12–20 V DC).

SP-13 EARPHONE
Provides clear audio in noisy environment.

STUBBY ANTENNAS

FA-SC56VS: 146–162MHz, 80mm
FA-SC57VS: 160–174MHz, 80mm
FA-SC73US: 450–490MHz, 60mm

SPEAKER-MICROPHONES

HM-46L:Slim dimensions. Equipped with an earphone jack and a transmit indicator.
HM-75A: Allows you to remotely select operating channel, etc., according to program.
HM-131L:Compact and durable body. Equipped with an earphone jack and a revolving clip.
HM-128L:Light weight earphone-mic. Compact microphone with PTT Switch clips to your lapel.

HEADSETS and PTT/VOX UNIT

HS-94: Earhook headset with flexible boom microphone.
HS-95: Behind-the-head headset with flexible boom microphone.
HS-97: Throat microphone fits aroud your neck and picks up a speech vibration.
VS-1L: PTT/VOX unit. Required when using these headsets with the transceiver.
HS-51: Headset HS-51 is also optionally available. Includes VOX, PTT and "one-touch" PTT with a time-out timer. (UHF only in U.S.A. and Canada)
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | ICOM | IC-F11 | Quotation Request | Search | E-mail