WISCO International

Home Page | Manufacturers | Decibel Products | Fiberglass | Quotation | Search | E-mail

ASP950 / ASP952 / ASP953 SERIES OF OMNI ANTENNAS
7.5, 9 OR 10 dBd GAIN, 806-960 MHz

ASP 950-952-953Heavy Duty — ARMORWEAVE" fiberglass construction gives many years of trouble-free operation
Consistent Performance — Triaxial center fed design of radiating elements eliminates
wandering beamtilt with wide frequency splits - extensive welding throughout
Invertible Mounting — May be configured for upside-down mounting where crowded
sites demand
High Wind Rating — Exceptional strength allows minimal flexing to prevent excessive
beam bending

Model ASP-950 Series — Rugged 7.5 dB gain fiber glass antenna available for either
trunked/conventional or cellular telephone frequency ranges

  • Broad Beamwidth — Eliminates need for beamtilt in applications where maximum gain is not critical
  • Rugged Design — maximum system reliability in adverse environmental conditions
  • Heliarc Welded Internal Construction — provides long term noise free operation by assuring positive connections
  • Inverted Mounting Capable

Model ASP-952 Series — Heavy duty 9 dB gain ARMORWEAVE" fiberglass antennas for trunking, cellular or MDS/MAS applications

  • Broadband — cover both 800 and 900 MHz trunking allocations with only one transmit and one receive antenna
  • High Power — 500 watt rating allows combining many transmitters on one antenna to ease site congestion
  • Protected — Direct ground provides maximum lightning protection for equipment
  • Inverted Mounting Capable

Model ASP-953 Series — Top performance 10 dB gain fiberglass omni antennas for cellular telephone Tx or Rx cell sites

  • 10 dB Omnidirectional Gain — where cell coverage parameters require maximum gain
  • Direct Ground Construction — for highest protection of equipment from lightning damage
  • High Power Rating — 16 or more transmitters can be combined into one antenna when tower space is at a premium
  • Lightweight — for ease of mounting with common clamp set
  • Inverted Mounting Capable

SPECIFICATIONS

Electrical ASP-950 ASP-952 ASP-953
Power (maximum) 500 watts
Gain 7.5 dB 9 dB 10dB
Frequency Ranqe (MHz) 806-869 (ASPRA prefix)
824-896 (ASPD prefix)
806-869 (ASPA prefix)
824-896 (ASPD prefix)
890-960 (ASPG prefix)
806-901 (ASPH prefix)
851-941 (ASPJ prefix)
820-855 (ASPB prefix)
865-900 (ASPD prefix)
Impedance (Nominal) 50 ohms
VSWR (maximum over
            frequency range)
1.5:1
Vertical Beamwidth 9'/2 degrees 6'/2 degrees 6 degrees
Lightning Protection Direct Ground
Termination

N female with 2 ft RG-394/U
jumper with N males

N female

Mechanical ASP-950 ASP-952 ASP-953
Rated Wind Velocity 116 mi/h (186 km/h) 118 mi/h (189 km/h) 165 mi/h (265 km/h)
Equivalent Flat Plate Area 0.9 ft� (0.08 m") 1.2 ft� (0.1 m�) 1.6 f� (0.14 m�)
Lateral Thrust 47.7 lb (21.6 kg) 40.2 lb (18.3 kg) 65.1 lb (29.5 kg)
Bending Moment 160.5 ft-lb (22 kg-m) 176 ft-lb (24.1 kg-m) 372 ft-lb (51 kg-m)
Length 9 ft (2.7 m) 11 ft (3.4 m) 14 ft (4.3 m)
Weight 14 lb (6.4 kg) 17 lb (7.7 kg) 27 lb (12.3 kg)
Radiating Elements Aluminum  
Support 2 3/4 inches (7cm) diameter aluminum pipe 28 inches (71 cm) long
Mounting Two (2) ASP- 616-type heavy-duty-mast clamps furnished*
Shipping Information ASP-950 ASP-952 ASP-953
Weigh 40 lb (18.1 kg) 44 lb (19.9 kg) 57 lb (25.8 kg)
Dimensions 4 1/2 dia. x 141 inches
(1 1.4 dia. x 358 cm)
4 1/2 dia. x 171 inches
(1 1.4 dia. x 435 cm)
*See catalog sections (or mounting brackets, coaxial cable, connectors and other materials required (or complete installation,
VAPOR-WRAP* connector sealant is included.
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | Decibel Products | Fiberglass | Quotation | Search | E-mail