WISCO International

Home Page | Manufacturers | Decibel Products | Directional | Quotation | Search | E-mail

BROAD BAND YAGI ANTENNA 9.5 dB GAIN, 150-174 and 220-222 MHz

DB292, a 6-element Yagi, is constructed with a reflector, four directors and a folded dipole driven element mounted on a common boom.
DB292
  • Broad Bandwidth - 10 MHz gives optimum performance in either single or multi-frequency systems.
  • Weather Resistant - The feed is enclosed within the dipole assembly for added protection from ice and snow.
  • Lightning Resistant - All elements are grounded.
  • Stacked Arrays - Two antennas proved 12.5 dB gain, four antennas 15.5 dB. A Vertical spacing of .75 to 1.0 wavelengths between antennas is recommended.
  • Key Applications - DB292s are ideal for systems in need of broad band coverage, protection against severe environments, high gain in a narrow sector or reduced interference on the backside of the antenna.
  • No Field Tuning - Antenna is adjusted at the factory for minimum VSWR.
  • Rugged - DB292 is made of aluminum alloys and reinforced with .875" (22.26 mm) sockets at the boom. Brackets and hardware are galvanized steel.
  • Ordering Information
    Use model number for correct frequency and specify termination if non-standard. Brackets and clamps are supplied. Other size clamps can be special ordered.

Examples: DB292-A, or 2 ea. DB292-A plus 1 ea. 14292-2-A for dual array. Order jumper cable separately, if desired.


SPECIFICATIONS

Gain

Order

9.5 dB 1 ea. DB292 Antenna
12.5 dB 2 ea. DB292 Antenna
1 ea. 14292-2 Dual Harness
15.5 dB 4 ea. DB292 Antenna
2 ea. 14292-2 Dual Harness
1 ea. 14292-4 Harness
Electrical Data
Frequency Ranges - MHz A=150-160, B=155-165,
C=164-174, JJ=220-222
Bandwidth
VSWR
Same as above
1.5 to 1 or less
Nominal Impedance - ohms
Forward gain (over half-wave dipole) - dB
50
9.5
Polarization
Maximum power input - watts
Vertical
350
Vertical beamwidth of single antenna
(half power)

50�
Horizontal pattern of beamwidth of single antenna
(half power)

62�
Front-to-back ratio - dB
Lightning protection
18
Direct ground
Standard Termination: Captive Type N-Male attached to end of
flexible lead. Other fittings are available on special order.
If UHF connector is required, an adapter is provided.
Mechanical Data
  DB292 DB292 (two) DB292 (four)
Support Boom (aluminum) - in. (mm)

Elements (aluminum) - in. (mm)


Dipole (aluminum) in. (mm)
1.5 (38.1) x2 (50.8)
with .078 (1.98) wall
.75 (19.05) diameter
w/.875 (22.231)
diameter sockets
.625 (15.88) dia.
1.5 (38.1)x2 (50.8)
with .078 (1.98) wall
.75 (19.05) diameter
w/.875 (22.3)
diameter sockets
.625 (15.88) dia.
1.58 (38.1)x2 (50.8)
with .078 (1.98) wall
.75 (19.05) diameter
w/.875 (22.23
diameter sockets
.625 (15.88) dia.
Maximum exposed area
(flat plate equivalent) - ft� (m�)

1.8 (.167)

3.6 (.335)

7.2 (.669)
Lateral thrust at 100 mph
(161 km/hr) - lbf (N)

72 (320.3)

144 (640.5)

228 (1281)
Wind rating:
Survival without ice - mph(km/hr)
Survival with .5" (12.7 mm)
radial ice - mph (km/hr)

100 (161)

70 (113)

100 (161)

70 (113)

100 (161)

70 (113)
Height - in (mm)
Overall Length - in. (mm)
38 (965.2)
84 (2,134)
110 (2,794)
84 (2,134)
254 (6,452)
84 (2,134)
Net weight - lbs. (kg)
Shipping weight - lbs (kg)
Mounting brackets
15 (6.8)
19 (8.62)
Galvanized steel
32 (14.51)
41 (18.60)
Galvanized steel
68 (30.84)
81 (36.74)
Galvanized steel
WISCO International, Inc. - MIAMI, FL U.S.A.
Fax: (954) 370-3997 | E-mail: wiscointl@wiscointl.com

Home Page | Manufacturers | Decibel Products | Directional | Quotation | Search | E-mail